How to Service the Right-Hand Side Blend Door Actuator in a Dual Zone System on 2006 Jeep Commander?

Start by removing and isolating the negative battery cable to turn off the air bag system, then disconnect the air door actuator after two minutes of discharge. In left-hand drive models, take away the glove box from the instrument panel; in right-hand drive models, remove the driver side's instrument panel silencer. Following this, take out the screws keeping the blend door actuator on the right of the HVAC air distribution housing then remove the actuator and the wire harness connector from the housing. Always insert the new actuator into the vehicle, then secure it on the right side of the HVAC air distribution housing, making sure the splines on its output shaft line up with the splines on the blend door cam. Screw in the bolts to 2 N.m or 17 in. lbs., attach the HVAC harness to the connectors and assemble the glove box or instrument panel silencer as needed. After that, add the negative battery cable back into place.

OEM 2006 Jeep Commander Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blend Door Actuators found

View related parts
2006 Jeep Commander Actuator, Front Part Number: 5143192AA
$112.24 MSRP: $167.00
You Save: $54.76 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door and Heater Blend Door Actuator.; Actuator A/C And Heater
- Position: Front
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.9 x 4.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143192AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Door Actuator Part Number: 5183151AB
$56.64 MSRP: $84.95
You Save: $28.31 (34%)
ADD TO CART
Product Specifications
- Other Name: Door - Temperature; HVAC Mode Door; Door; Door Temperature Also Used Assembly The Blend Door; Door Temperature
- Replaces: 5183151AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.7 x 3.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183151AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Actuator Part Number: 5183152AA
$32.35 MSRP: $51.25
You Save: $18.90 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - Fuel Control; HVAC Blend Door Actuator; Actuator A/C And Heater
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.6 x 4.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183152AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Blend Door Actuator Parts and Q&A

Q: How to Service the Right-Hand Side Blend Door Actuator in a Dual Zone System on 2006 Jeep Commander?
A: Start by removing and isolating the negative battery cable to turn off the air bag system, then disconnect the air door actuator after two minutes of discharge. In left-hand drive models, take away the glove box from the instrument panel; in right-hand drive models, remove the driver side's instrument panel silencer. Following this, take out the screws keeping the blend door actuator on the right of the HVAC air distribution housing then remove the actuator and the wire harness connector from the housing. Always insert the new actuator into the vehicle, then secure it on the right side of the HVAC air distribution housing, making sure the splines on its output shaft line up with the splines on the blend door cam. Screw in the bolts to 2 N.m or 17 in. lbs., attach the HVAC harness to the connectors and assemble the glove box or instrument panel silencer as needed. After that, add the negative battery cable back into place.