Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Jeep Commander HVAC Pressure Switch

Air Pressure Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Pressure Switch found

  • 2006 Jeep Commander HVAC Pressure Switch - 5003862AA
    2006 Jeep Commander HVAC Pressure Switch - 5003862AA
    2006 Jeep Commander HVAC Pressure Switch - 5003862AA
    2006 Jeep Commander HVAC Pressure Switch Diagram - 5003862AA
    View related parts

    2006 Jeep Commander Check Valve, Rear Part Number: 5003862AA

    $4.62 MSRP: $6.95
    You Save: $2.33 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Valve - A/C Line; High Side Adapter; Valve Core; Compressor Cut-Out; HVAC Switch; Trinary Switch; Pressure Switch; Fill Valve; Suction, Liquid, Discharge Line Valves; A/C Check Valve Core.
    • Position: Rear
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 0.8 x 0.5 x 0.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5003862AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander HVAC Pressure Switch Parts and Q&A

  • Q: How to Service an HVAC Pressure Switch on 2006 Jeep Commander?
    A: First thing in repairing the HVAC pressure switch is to take out and isolate the negative battery cable. After that, separate the wire harness connector from the HVAC pressure switch found on the A/C discharge line. Take the HVAC pressure switch out of the fitting on the A/C discharge line and throw away the O-ring seal. Only use the specified rubber O-ring for R-134a and the matching oil recommended for the A/C compressor during installation. Lubricate a brand-new O-ring seal with refrigerant oil and slip it onto the fitting of the discharge line. After that, place the HVAC pressure switch on the A/C discharge line and secure it tightly. Join the wire harness connector to the HVAC pressure switch and then attach the negative battery cable to its clamp.

Related 2006 Jeep Commander Parts

Alternate Year Models

+
2007 Jeep Commander HVAC Pressure Switch