How to Service a Brake Fluid Level Sensor on 2006 Jeep Grand Cherokee?

Remove the wire connector from the fluid level sensor before you try to service it. On the same side as the master cylinder reservoir, unlock the tabs with a small screwdriver and then pull the sensor outward from the place it connects to the reservoir. First, put a new O-ring on the sensor, put the sensor into the reservoir and lock the tabs. When that's done, reconnect the wire connector to the sensor.

OEM 2006 Jeep Grand Cherokee Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2006 Jeep Grand Cherokee Fluid Level Sensor Part Number: 5013903AA
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Sensor; Sensor Brake Fluid Level
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5013903AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Jeep Grand Cherokee Brake Fluid Level Sensor Parts and Q&A

Q: How to Service a Brake Fluid Level Sensor on 2006 Jeep Grand Cherokee?
A: Remove the wire connector from the fluid level sensor before you try to service it. On the same side as the master cylinder reservoir, unlock the tabs with a small screwdriver and then pull the sensor outward from the place it connects to the reservoir. First, put a new O-ring on the sensor, put the sensor into the reservoir and lock the tabs. When that's done, reconnect the wire connector to the sensor.