Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Jeep Liberty Ball Joint

Control Arm Joint
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

  • 2006 Jeep Liberty Ball Joint - 5114037AJ
    2006 Jeep Liberty Ball Joint - 5114037AJ
    2006 Jeep Liberty Ball Joint Diagram - 5114037AJ
    View related parts

    2006 Jeep Liberty Lower Ball Joint, Front Part Number: 5114037AJ

    $102.51 MSRP: $226.00
    You Save: $123.49 (55%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint, Front Lower; Suspension Ball Joint; Ball Joint
    • Position: Front Lower
    • Replaces: 5114037AC, 5114037AF, 5114037AI, 5114037AG, 5114037AH, CBLFC363, CBLFC363AC, 5114037AD, 5114037AE, 5114037AA, CBLFC363AB, 5114037AB, CBLFC363AE, CBLFC363AD
    • Item Weight: 1.70 Pounds
    • Item Dimensions: 3.2 x 4.8 x 5.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5114037AJ
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Liberty Submodels:
    • 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
  • 2006 Jeep Liberty Ball Joint - 52088647AC
    2006 Jeep Liberty Ball Joint Diagram - 52088647AC
    View related parts

    2006 Jeep Liberty Ball Joint, Rear Upper Part Number: 52088647AC

    $214.21 MSRP: $304.00
    You Save: $89.79 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Balljoint - Upper Control Arm; Suspension Ball Joint, Rear Upper; Suspension Ball Joint; Upper Ball Joints
    • Position: Rear Upper
    • Replaces: 52088647AB
    • Item Weight: 3.00 Pounds
    • Item Dimensions: 5.2 x 5.3 x 5.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52088647AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Liberty Submodels:
    • 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2006 Jeep Liberty Ball Joint Parts and Q&A

  • Q: How to Service and Repair a Front Suspension Ball Joint on 2006 Jeep Liberty?
    A: You should first remove the tire and wheel assembly, then take off the brake caliper and brake rotor to work on the lower ball joint. Separate the tie rod from the steering knuckle and detach the steering knuckle as well. Move the halfshaft and support it so it is out of your working area if your car has this setup. On the threaded areas of the tool, use a lot of lubricant to support its long life and help with proper operation when you need to remove or install it. Put the steering knuckle in a vise and remove its ball joint boot next. Use special tools C-4212-F, 8859-2 and 8859-1 to press the ball joint from the steering knuckle. When setting the ball joint into the knuckle, have the plastic shipping cover secured to the ball joint boot and press gently with C-4212-F, 8859-3 and 6761. After you have bolted it in, uninstall the support for the halfshaft and reinstall it when equipped. Attach the steering knuckle and the tie rod end onto the steering knuckle. Tighten the halfshaft securing nut to 136 Nm (100 ft. lbs.), fit back the brake caliper and rotor, then install the tire and wheel assembly. You should check how high the car sits off the ground and have the wheels aligned before you drive.

Related 2006 Jeep Liberty Parts

Alternate Year Models

+
2005 Jeep Liberty Ball Joint 2007 Jeep Liberty Ball Joint