How to Maintain the Lower Control Arm on 2006 Jeep Liberty?

To work on the lower control arm, you should first lift and support the car, then take off the tire and wheel. Following that, take out the bolt fastening the lower clevis bracket to the lower control arm (4) and the stabilizer link bolt at the lower control arm (4). Remove the lower ball joint nut (3) and use tool C-4150A to part the lower ball joint from the lower control arm. Number the bolts connect the lower control arm to the chassis as 1 front and 5 rear and then remove the cam/pivot bolt from each end to replace the lower control arm (4). For correct installation, place the lower control arm (4) onto the car first, then install the rear cam/pivot bolt (5) and the front cam/pivot bolt (1). Position and tighten the lower ball joint nut (3) to 81 Nm (60 ft. lbs.). Place the marks on the cam/pivot bolts in line and tighten the nuts using 170 Nm (125 ft. lbs.). Installing linkage bolts and nuts comes next. Secure the stabilizer link bolt to the lower control arm and tighten the nut at 136 Nm (100 ft. lbs.) and subsequently tighten the lower clevis bracket bolt at 150 Nm (110 ft. lbs.). Once done, put the wheel and tire back on and get a wheel alignment performed.

OEM 2006 Jeep Liberty Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arms found

View related parts
2006 Jeep Liberty Lower Control Arm Part Number: 52088682AC
$54.08 MSRP: $117.00
You Save: $62.92 (54%)
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Control Arm
- Position: Lower
- Replaces: 52088682AB
- Item Weight: 7.60 Pounds
- Item Dimensions: 2.6 x 3.6 x 22.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088682AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Lower Control Arm, Front Passenger Side Part Number: 52088636AG
$787.80 MSRP: $1180.00
You Save: $392.20 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Front Right Lower; Suspension Control Arm; Control Arm
- Position: Front Lower Passenger Side
- Replaces: 52088636AF
- Item Weight: 24.10 Pounds
- Item Dimensions: 20.9 x 17.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088636AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Upper Control Arm, Front Part Number: 68068615AB
$314.93 MSRP: $480.00
You Save: $165.07 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Upper Suspension Control Arm and Ball Joint Assembly.
- Position: Front Upper
- Replaces: 52088632AD, 52088632AC, 68068615AA
- Item Weight: 7.30 Pounds
- Item Dimensions: 17.6 x 10.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68068615AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Lower Control Arm, Front Driver Side Part Number: 52088637AG
$916.56 MSRP: $1165.00
You Save: $248.44 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Front Left Lower; Suspension Control Arm; Control Arm
- Position: Front Lower Driver Side
- Replaces: 52088637AF
- Item Weight: 24.20 Pounds
- Item Dimensions: 21.5 x 17.0 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088637AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Upper Control Arm, Rear Part Number: 52088901AE
Product Specifications
- Other Name: Arm - Upper Control; Rear Upper Suspension Control Arm and Ball Joint Assembly.
- Position: Rear Upper
- Replaces: 52088901AD, 52088901AC
- Item Weight: 13.50 Pounds
- Item Dimensions: 26.1 x 24.5 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088901AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2006 Jeep Liberty Control Arm Parts and Q&A

Q: How to Maintain the Lower Control Arm on 2006 Jeep Liberty?
A: To work on the lower control arm, you should first lift and support the car, then take off the tire and wheel. Following that, take out the bolt fastening the lower clevis bracket to the lower control arm (4) and the stabilizer link bolt at the lower control arm (4). Remove the lower ball joint nut (3) and use tool C-4150A to part the lower ball joint from the lower control arm. Number the bolts connect the lower control arm to the chassis as 1 front and 5 rear and then remove the cam/pivot bolt from each end to replace the lower control arm (4). For correct installation, place the lower control arm (4) onto the car first, then install the rear cam/pivot bolt (5) and the front cam/pivot bolt (1). Position and tighten the lower ball joint nut (3) to 81 Nm (60 ft. lbs.). Place the marks on the cam/pivot bolts in line and tighten the nuts using 170 Nm (125 ft. lbs.). Installing linkage bolts and nuts comes next. Secure the stabilizer link bolt to the lower control arm and tighten the nut at 136 Nm (100 ft. lbs.) and subsequently tighten the lower clevis bracket bolt at 150 Nm (110 ft. lbs.). Once done, put the wheel and tire back on and get a wheel alignment performed.