How to Service and Repair a Wheel Bearing on 2006 Jeep Liberty?

To fix or repair the wheel bearing, lift the vehicle, take off the tire and wheel, after that the caliper adapter and make sure you secure the caliper to protect the hose. Following that, take the disc brake rotor off, unfasten the wheel speed sensor and the bracket for its wire. If your truck uses four-wheel drive, take out the nut from the drive shaft and remove all the bolts connecting the hub or bearing assembly, then remove the assembly from the vehicle. To install, put the hub/bearing assembly on the vehicle and bolt it down with the three bolts tightened to 130 Nm (96 ft. lbs.). When four-wheel drive is involved, fit and tighten the axle shaft nut to 135 Nm (100 ft. lbs.) Put back the bracket for the wheel speed sensor wire and fasten the sensor to the end of the hub with a bolt that is 13.5 Nm (10 ft. lbs.). Then, install the disc brake rotor and disc brake caliper adapter, tightening the nut to 135 Nm (100 ft. lbs.) and attach the tire and wheel assembly once more.

OEM 2006 Jeep Liberty Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2006 Jeep Liberty Wheel Bearing, Rear Part Number: 3507898AB
$57.95 MSRP: $87.55
You Save: $29.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Axle Shaft; Drive Axle Shaft Bearing, Rear; Differential Bearing; Axle Bearing; Axle Bearings; Bearing Assembly; Differential Cover Bearing; Bearing; Bearing Axle Shaft; Bearing Wheel
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.1 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3507898AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Hub Assembly, Front Passenger Side Part Number: 52128692AF
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Right Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing
- Position: Front Passenger Side
- Replaces: 52128692AE, 52128692AA, 52128692AB, 52128692AD, 52128692AC
- Item Weight: 12.30 Pounds
- Item Dimensions: 8.4 x 8.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128692AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Hub Assembly, Front Driver Side Part Number: 52128693AF
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Left Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit.; Front Hub & Bearing
- Position: Front Driver Side
- Replaces: 52128693AD, 52128693AC, 52128693AB, 52128693AE, 52128693AA
- Item Weight: 12.90 Pounds
- Item Dimensions: 8.2 x 8.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128693AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2006 Jeep Liberty Wheel Bearing Parts and Q&A

Q: How to Service and Repair a Wheel Bearing on 2006 Jeep Liberty?
A: To fix or repair the wheel bearing, lift the vehicle, take off the tire and wheel, after that the caliper adapter and make sure you secure the caliper to protect the hose. Following that, take the disc brake rotor off, unfasten the wheel speed sensor and the bracket for its wire. If your truck uses four-wheel drive, take out the nut from the drive shaft and remove all the bolts connecting the hub or bearing assembly, then remove the assembly from the vehicle. To install, put the hub/bearing assembly on the vehicle and bolt it down with the three bolts tightened to 130 Nm (96 ft. lbs.). When four-wheel drive is involved, fit and tighten the axle shaft nut to 135 Nm (100 ft. lbs.) Put back the bracket for the wheel speed sensor wire and fasten the sensor to the end of the hub with a bolt that is 13.5 Nm (10 ft. lbs.). Then, install the disc brake rotor and disc brake caliper adapter, tightening the nut to 135 Nm (100 ft. lbs.) and attach the tire and wheel assembly once more.