How Do A/C Compressor Cut-Out Switches Relate to Low Pressure Sensor Service and Repair on 2006 Jeep Wrangler?

You should first unhook the negative cable from your battery before servicing the A/C low pressure switch. Once that's done, separate the wire harness connector from the A/C low pressure switch and unscrew the switch from the fitting at the top of the accumulator, letting go of the O-ring seal. The O-ring included with the kit should only be used, along with the recommended R-134a refrigerant oil for running the A/C compressor. Apply a little clean refrigerant oil to a new rubber O-ring seal and put it on the A/C low pressure switch fitting. Twist the A/C low pressure switch securely onto the accumulator, attach the switch wire harness connector and then attach the negative battery cable.

OEM 2006 Jeep Wrangler A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C Compressor Cut-Out Switches found

View related parts
2006 Jeep Wrangler Pressure Switch Part Number: 4897617AA
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897617AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Lower Pressure Cut-Off Switch Part Number: 5015872AC
Product Specifications
- Other Name: Switch - A/C Low Pressure Cut Off; Compressor Cut-Out; HVAC Pressure Switch; Trinary Switch.; Switch A/C Low Pressure Cut Off 05015872Ac; Switch A/C Low Pressure Cut Off
- Replaces: 5015872AA, 5015872AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015872AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Lower Pressure Cut-Off Switch Part Number: 5096126AA
Product Specifications
- Other Name: Switch - A/C - Pressure; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; A/C Trinary Switch; HVAC System Switch; Switch Kit A/C - Pressure Includes Item # 22; Switch Kit A/C - Pressure
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5096126AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 4 Cyl 2.4 L GAS

2006 Jeep Wrangler A/C Compressor Cut-Out Switches Parts and Q&A

Q: How Do A/C Compressor Cut-Out Switches Relate to Low Pressure Sensor Service and Repair on 2006 Jeep Wrangler?
A: You should first unhook the negative cable from your battery before servicing the A/C low pressure switch. Once that's done, separate the wire harness connector from the A/C low pressure switch and unscrew the switch from the fitting at the top of the accumulator, letting go of the O-ring seal. The O-ring included with the kit should only be used, along with the recommended R-134a refrigerant oil for running the A/C compressor. Apply a little clean refrigerant oil to a new rubber O-ring seal and put it on the A/C low pressure switch fitting. Twist the A/C low pressure switch securely onto the accumulator, attach the switch wire harness connector and then attach the negative battery cable.