JeepParts
My Garage
My Account
Cart
OEM 2006 Jeep Wrangler Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Wiper Motors found
2006 Jeep Wrangler Wiper Motor, Front Part Number: 55156374AD
Product Specifications- Other Name: Module - Wiper; Windshield Wiper Linkage, Front; Wiper Linkage; Linkage Assembly; Front Transmission; Front Motor
- Position: Front
- Replaces: R5156374AC, 55156374AA, 55156374AC, 55156374AB
- Item Weight: 8.40 Pounds
- Item Dimensions: 29.3 x 9.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156374AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Jeep Wrangler Wiper Motor Part Number: 55156278AA
Product Specifications- Other Name: Motor - Windshield Wiper; Back Glass Wiper Motor; Front Motor; Rear Motor; Motor; Motor Windshield Wiper
- Item Weight: 3.40 Pounds
- Item Dimensions: 12.0 x 7.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156278AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2006 Jeep Wrangler Wiper Motor Parts and Q&A
- Q: How to Service and Repair a Wiper Motor and Its Rubber Boot on 2006 Jeep Wrangler?A: Removing the wiper motor and its boot starts with disassembling the front wiper unit. The first part is unscrewing and removing the front wiper module from the cowl plenum. After that, unlock the retainer holding the wiper motor pigtail wire connector to the front wiper module bracket. Reach under the front of the wiper arm and unscrew the nut that holds the wiper motor's crank arm to its output shaft. Remove the three screws holding the wiper motor to the front wiper module mounting bracket and then withdraw the wiper motor from the bracket. After you have dismounted the wiper motor, snap it onto the front bracket of the wiper module and tighten the screws to 8 Nm (70 in. lbs.). Then, put the wiper motor crank arm over the front wiper motor output shaft, add and tighten the nut to secure both parts and tighten the nut to 12 Nm (101 in. lbs.). First, snap the pigtail wire connector retainer from the wiper motor into the matching hole on the front wiper module bracket and finally, put the module back into the cowl plenum.
Related 2006 Jeep Wrangler Parts
2006 Jeep Wrangler Fender
2006 Jeep Wrangler Instrument Cluster
2006 Jeep Wrangler Windshield Washer Nozzle
2006 Jeep Wrangler Wiper Arm
2006 Jeep Wrangler Windshield Wiper
2006 Jeep Wrangler Wiper Blade
2006 Jeep Wrangler Hood Hinge
2006 Jeep Wrangler Tailgate Handle
2006 Jeep Wrangler Washer Reservoir
2006 Jeep Wrangler Window Crank Handles
2006 Jeep Wrangler Window Run
2006 Jeep Wrangler Wiper Pivot