How to Remove and Replace a Power Steering Pump on a 2.0L/2.4L Engine on 2007 Chrysler PT Cruiser?

When swapping the power steering pump on a 2.0L/2.4L engine, put Mopar(R) Dielectric Grease on the new O-ring, set its gasket in the water pump body groove with care so that it doesn't move or let coolant out. After that, secure the pump body to the block with screws and tighten them to 12 Nm (105 in. lbs.). Turn the pump manually to make sure it can rotate correctly. Test the pressure on the cooling system and make sure it reaches 103 Kpa (15 psi) before checking if any water leaks around the water pump shaft seal or O-ring. Then, put in the rear timing belt cover and camshaft sprockets and finally, install the timing belt.

OEM 2007 Chrysler PT Cruiser Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

View related parts
2007 Chrysler PT Cruiser Power Steering Pump Part Number: 5273760AC
$339.71 MSRP: $516.00
You Save: $176.29 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 5272313AI, 5272313AG, 5272313AE, 5272313AF, 5273760AB, 5272313AC
- Item Weight: 6.60 Pounds
- Item Dimensions: 10.6 x 10.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273760AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Power Steering Pump Part Number: 5273759AJ
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 5272929AC, 5273759AB, 5273759AC, 5273759AA, R5273759AJ, 5272929AA, 5273759AI
- Item Weight: 5.50 Pounds
- Item Dimensions: 7.0 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273759AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2007 Chrysler PT Cruiser Power Steering Pump Parts and Q&A

Q: How to Remove and Replace a Power Steering Pump on a 2.0L/2.4L Engine on 2007 Chrysler PT Cruiser?
A: When swapping the power steering pump on a 2.0L/2.4L engine, put Mopar(R) Dielectric Grease on the new O-ring, set its gasket in the water pump body groove with care so that it doesn't move or let coolant out. After that, secure the pump body to the block with screws and tighten them to 12 Nm (105 in. lbs.). Turn the pump manually to make sure it can rotate correctly. Test the pressure on the cooling system and make sure it reaches 103 Kpa (15 psi) before checking if any water leaks around the water pump shaft seal or O-ring. Then, put in the rear timing belt cover and camshaft sprockets and finally, install the timing belt.