How to Install a Steering Wheel and Ensure the Airbag System Functions Properly on 2007 Chrysler PT Cruiser?

Screw the rear cover (2) onto the steering wheel facing it, then tighten the screws (3). If speed control is present, place the speed control switch from the rear and secure its base with two rear screws, after which install the front screw to fix the switch to the steering wheel. After that, start with the horn contacts (pads) (2) and place them by putting the connector at the 12 o'clock position at one end of the hub and wiring the rest counterclockwise from there. Place the white contacts on the left and the black contacts on the right and confirm there is no interference from the wiring with anything on the wheels. If you have speed control, use the connector marked 3 in your stage. Make certain that the front wheels are pointing ahead and the turn signal stalk is not pushed to either side. The Clock Spring should be put in the center to avoid harming anything inside; if you're unsure, do the centering procedure. Thread the two wiring leads (1) through the upper opening (2) in the wheel (3) and slide the wheel down the steering column, making certain the Clock Spring matches the back of the wheel (without the Clock Spring pressing together with the steering wheel). Screw in the steering wheel retaining bolt and tighten it to 43 Nm (32 ft. lbs.). Connect the horn wiring connector to the Clock Spring (1) and then attach the driver's air bag. Connecting the battery ground cable before testing the air bag System could cause personal injury or death, so never perform this step before the air bag System Test. When finished with the air bag System Test, link up the battery ground terminal, check each column-mounted part now, reset the radio should you need to and do the same with the clock.

OEM 2007 Chrysler PT Cruiser Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Wheels found

View related parts
2007 Chrysler PT Cruiser Steering Wheel, Slate Gray Part Number: 1GR65XDHAA
$47.08 MSRP: $270.00
You Save: $222.92 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Replaces: 1EW88XDHAA, 1EW87XDHAA, ZF88XDHAD, ZF87XDHAD
- Item Weight: 4.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GR65XDHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, GT, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Steering Wheel, Taupe Part Number: 1EW90DK5AC
$209.07 MSRP: $442.00
You Save: $232.93 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering
- Replaces: 1EW90DK5AB, 1EZ86DK5AA, 1FF52DK5AA, ZF90DK5AD, 1EW90DK5AA
- Item Weight: 2.30 Pounds
- Item Dimensions: 17.4 x 15.6 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EW90DK5AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Steering Wheel, Slate Gray Part Number: 1EW90XDHAC
$243.92 MSRP: $442.00
You Save: $198.08 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Replaces: 1EW90XDHAB, 1EW90XDHAA, ZF90XDHAD, 1FF52XDHAA, 1EZ86XDHAA
- Item Weight: 7.60 Pounds
- Item Dimensions: 18.7 x 18.9 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EW90XDHAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Steering Wheel, Slate Gray Part Number: 1EX89XDHAD
Product Specifications
- Other Name: Wheel - Steering
- Replaces: 1EZ85XDHAA, 1FE75XDHAA, ZF89XDHAD
- Item Weight: 2.30 Pounds
- Item Dimensions: 17.1 x 15.9 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EX89XDHAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Steering Wheel, Taupe Part Number: 1EX89DK5AC
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Replaces: 1EX89DK5AA, 1FE75DK5AA, 1EZ85DK5AA, ZF89DK5AD, 1EX89DK5AB
- Item Weight: 4.70 Pounds
- Item Dimensions: 15.8 x 16.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EX89DK5AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Steering Wheel, Slate Gray Part Number: 1GR65BDAAA
Product Specifications
- Other Name: Wheel - Steering
- Replaces: 1EW88BDAAA, 1EW87BDAAA, ZF87BDAAC, ZF87BDAAD, ZF88BDAAD, ZF87BDAAB, ZF88BDAAB, ZF88BDAAC
- Item Weight: 4.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GR65BDAAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Steering Wheel, Taupe Part Number: 1GR65DK5AA
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Replaces: 1EW88DK5AA, ZF88DK5AD, ZF87DK5AD, 1EW87DK5AA
- Item Weight: 5.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GR65DK5AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Steering Wheel, Slate Gray Part Number: 1EW90BDAAB
Product Specifications
- Other Name: Wheel - Steering
- Replaces: 1DF86BDAAA, 1FF52BDAAA, 1EZ86BDAAA, ZF90BDAAB, 1EW90BDAAA, ZF90BDAAC, ZF90BDAAD
- Item Weight: 0.70 Pounds
- Item Dimensions: 40.8 x 1.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EW90BDAAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2007 Chrysler PT Cruiser Steering Wheel Parts and Q&A

Q: How to Install a Steering Wheel and Ensure the Airbag System Functions Properly on 2007 Chrysler PT Cruiser?
A: Screw the rear cover (2) onto the steering wheel facing it, then tighten the screws (3). If speed control is present, place the speed control switch from the rear and secure its base with two rear screws, after which install the front screw to fix the switch to the steering wheel. After that, start with the horn contacts (pads) (2) and place them by putting the connector at the 12 o'clock position at one end of the hub and wiring the rest counterclockwise from there. Place the white contacts on the left and the black contacts on the right and confirm there is no interference from the wiring with anything on the wheels. If you have speed control, use the connector marked 3 in your stage. Make certain that the front wheels are pointing ahead and the turn signal stalk is not pushed to either side. The Clock Spring should be put in the center to avoid harming anything inside; if you're unsure, do the centering procedure. Thread the two wiring leads (1) through the upper opening (2) in the wheel (3) and slide the wheel down the steering column, making certain the Clock Spring matches the back of the wheel (without the Clock Spring pressing together with the steering wheel). Screw in the steering wheel retaining bolt and tighten it to 43 Nm (32 ft. lbs.). Connect the horn wiring connector to the Clock Spring (1) and then attach the driver's air bag. Connecting the battery ground cable before testing the air bag System could cause personal injury or death, so never perform this step before the air bag System Test. When finished with the air bag System Test, link up the battery ground terminal, check each column-mounted part now, reset the radio should you need to and do the same with the clock.