Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Dodge Caliber Tie Rod End

Steering Rod End
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

  • 2007 Dodge Caliber Tie Rod End - 5183761AD
    2007 Dodge Caliber Tie Rod End - 5183761AD
    2007 Dodge Caliber Tie Rod End - 5183761AD
    2007 Dodge Caliber Tie Rod End - 5183761AD
    2007 Dodge Caliber Tie Rod End - 5183761AD
    2007 Dodge Caliber Tie Rod End Diagram - 5183761AD
    View related parts

    2007 Dodge Caliber Outer Tie Rod Part Number: 5183761AD

    $67.75 MSRP: $99.95
    You Save: $32.20 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: Tie Rod - Outer; Steering Tie Rod End, Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
    • Position: Outer
    • Replaces: 5183761AC, 5183761AB, 68014944AA, 5183761AA, 68141058AA, 5103320AB, 5103320AA, 68033477AA
    • Item Weight: 1.60 Pounds
    • Item Dimensions: 2.5 x 7.9 x 10.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183761AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Tie Rod End Parts and Q&A

  • Q: How to Service and Repair a Tie Rod End on 2007 Dodge Caliber?
    A: Begin by raising and supporting the vehicle and then take off the nuts holding the wheel mount and remove the whole wheel and tire. Release the jam nut on the tie rod and then hold the tie rod's end stud with a wrench while loosening and removing the nut from the knuckle with a regular or crowfoot wrench. Attach Remover, Special Tool 9360, to the tie rod end and use it to release the tie rod from the knuckle. Then take out the outer tie rod from the knuckle. Placing the wheel at the correct toe can be easier if you remember how many revolutions you make when removing the outer tie rod from the inner one. Also, remove the outer tie rod from the inner tie rod.

Related 2007 Dodge Caliber Parts

Alternate Year Models

+
2008 Dodge Caliber Tie Rod End