Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Caliber Tie Rod End

Steering Rod End
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

  • 2008 Dodge Caliber Tie Rod End - 5183761AD
    2008 Dodge Caliber Tie Rod End - 5183761AD
    2008 Dodge Caliber Tie Rod End - 5183761AD
    2008 Dodge Caliber Tie Rod End - 5183761AD
    2008 Dodge Caliber Tie Rod End - 5183761AD
    2008 Dodge Caliber Tie Rod End Diagram - 5183761AD
    View related parts

    2008 Dodge Caliber Outer Tie Rod Part Number: 5183761AD

    $67.75 MSRP: $99.95
    You Save: $32.20 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: Tie Rod - Outer; Steering Tie Rod End, Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
    • Position: Outer
    • Replaces: 5183761AC, 5183761AB, 68014944AA, 5183761AA, 68141058AA, 5103320AB, 5103320AA, 68033477AA
    • Item Weight: 1.60 Pounds
    • Item Dimensions: 2.5 x 7.9 x 10.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183761AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Tie Rod End Parts and Q&A

  • Q: How to Safely Remove a Tie Rod End on 2008 Dodge Caliber?
    A: Before you remove the outer tie rod end, first lift and support your vehicle, then remove the nuts holding the tire and wheel assembly. Take out the jam nut from the tie rod and remove the nut on the outer tie rod end connecting it to the knuckle using the same method: a wrench on the stud and a normal or crowfoot wrench on the nut. Remove the outer tie rod from the knuckle by first releasing it from the tie rod end using Remover, Special Tool 9360. While removing the outer tie rod for the inner one, pay attention to the number of turns you make so the drive wheel gets closer to the proper alignment. After that, take off the outer tie rod from the inner tie rod.

Related 2008 Dodge Caliber Parts

Alternate Year Models

+
2007 Dodge Caliber Tie Rod End 2009 Dodge Caliber Tie Rod End