How to Install an HVAC Pressure Switch on 2007 Jeep Commander?

Installing the Refrigerant Pressure Sensor / Switch requires using the proper O-ring, made specifically for R-134a and also using only the correct oil type for the A/C compressor. Put enough clean refrigerant oil on a new O-ring and insert it into the discharge line fitting (3). Following that, install the HVAC pressure switch (2) firmly onto the A/C discharge line. Afterward, put the wire harness connector (1) on top of the HVAC pressure switch and then reattach the negative battery cable.

OEM 2007 Jeep Commander HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Pressure Switch found

View related parts
2007 Jeep Commander Check Valve, Rear Part Number: 5003862AA
$4.62 MSRP: $6.95
You Save: $2.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High Side Adapter; Valve Core; Compressor Cut-Out; HVAC Switch; Trinary Switch; Pressure Switch; Fill Valve; Suction, Liquid, Discharge Line Valves; A/C Check Valve Core.
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 0.8 x 0.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5003862AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander HVAC Pressure Switch Parts and Q&A

Q: How to Install an HVAC Pressure Switch on 2007 Jeep Commander?
A: Installing the Refrigerant Pressure Sensor / Switch requires using the proper O-ring, made specifically for R-134a and also using only the correct oil type for the A/C compressor. Put enough clean refrigerant oil on a new O-ring and insert it into the discharge line fitting (3). Following that, install the HVAC pressure switch (2) firmly onto the A/C discharge line. Afterward, put the wire harness connector (1) on top of the HVAC pressure switch and then reattach the negative battery cable.