Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Jeep Commander Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blend Door Actuators found

  • 2007 Jeep Commander Blend Door Actuator - 5143192AA
    2007 Jeep Commander Blend Door Actuator - 5143192AA
    2007 Jeep Commander Blend Door Actuator - 5143192AA
    2007 Jeep Commander Blend Door Actuator - 5143192AA
    2007 Jeep Commander Blend Door Actuator - 5143192AA
    2007 Jeep Commander Blend Door Actuator Diagram - 5143192AA
    View related parts

    2007 Jeep Commander Actuator, Front Part Number: 5143192AA

    $112.24 MSRP: $167.00
    You Save: $54.76 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door and Heater Blend Door Actuator.; Actuator A/C And Heater
    • Position: Front
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 3.9 x 4.1 x 5.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5143192AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2007 Jeep Commander Blend Door Actuator - 5183152AA
    2007 Jeep Commander Blend Door Actuator Diagram - 5183152AA
    View related parts

    2007 Jeep Commander Actuator Part Number: 5183152AA

    $32.35 MSRP: $51.25
    You Save: $18.90 (37%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator - Fuel Control; HVAC Blend Door Actuator; Actuator A/C And Heater
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 5.6 x 4.1 x 2.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183152AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2007 Jeep Commander Blend Door Actuator - 5183151AB
    2007 Jeep Commander Blend Door Actuator Diagram - 5183151AB
    View related parts

    2007 Jeep Commander Door Actuator Part Number: 5183151AB

    $56.64 MSRP: $84.95
    You Save: $28.31 (34%)
    ADD TO CART
    Product Specifications
    • Other Name: Door - Temperature; HVAC Mode Door; Door; Door Temperature Also Used Assembly The Blend Door; Door Temperature
    • Replaces: 5183151AA
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 6.7 x 3.9 x 1.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183151AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Blend Door Actuator Parts and Q&A

  • Q: How to Install the Blend Door Actuator for Panel/Defrost/Demist/Floor on 2007 Jeep Commander?
    A: To set up the mode door actuator for the panel/defrost/demist/floor, mount it in the car and secure it to the left of the HVAC air distribution housing. If needed, turn the actuator a little to position the splines on the output shaft evenly with the splines on the mode door cam. Place the screws that join the actuator to the air distribution housing, then use a torque wrench to tighten them to 2 Nm (17 in. lbs.) and join the HVAC wire harness connector to the actuator. On LHD models, fit the instrument panel silencer to the driver's side of the instrument panel, whereas the battery should go in the left instrument panel on RHD models. Attach the negative battery cable into the battery again. To securely fix the mode door actuator at the 2nd row/console position, set it into the vehicle and attach it to the rear of the HVAC air distribution housing while matching the splines on both output and pivot shafts. Fix the actuator to the rear end of the housing with the two screws, fastening them to 2 Nm (17 in. lbs.). Then, connect the HVAC wire harness connector to the actuator. Once all is secure, install the instrument panel and hook the negative battery cable back on.

Related 2007 Jeep Commander Parts

Alternate Year Models

+
2006 Jeep Commander Blend Door Actuator 2008 Jeep Commander Blend Door Actuator