How to Install a Blower Motor Resistor in the Rear HVAC Housing on 2007 Jeep Commander?

The rear blower motor resistor should be placed inside the back of the rear HVAC housing. Remove the cover from the rear, then attach the rear blower motor resistor to the rear HVAC housing with two screws, tightening the screws to no more than 2 Nm (17 in. lbs.). Attach the rear HVAC wire harness connector to the rear blower motor resistor and finally put the rear HVAC housing into place.

OEM 2007 Jeep Commander Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2007 Jeep Commander Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68317103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Resistor, Front Part Number: 5143127AA
$64.04 MSRP: $83.95
You Save: $19.91 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143127AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Resistor, Rear Part Number: 5183153AA
$17.09 MSRP: $36.80
You Save: $19.71 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor Blower Motor; Blower Motor Resistor
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 3.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183153AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Blower Motor Resistor Parts and Q&A

Q: How to Install a Blower Motor Resistor in the Rear HVAC Housing on 2007 Jeep Commander?
A: The rear blower motor resistor should be placed inside the back of the rear HVAC housing. Remove the cover from the rear, then attach the rear blower motor resistor to the rear HVAC housing with two screws, tightening the screws to no more than 2 Nm (17 in. lbs.). Attach the rear HVAC wire harness connector to the rear blower motor resistor and finally put the rear HVAC housing into place.