OEM 2008 Chrysler PT Cruiser Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

  • 2008 Chrysler PT Cruiser Brake Fluid Level Sensor - 5142505AA
    2008 Chrysler PT Cruiser Brake Fluid Level Sensor Diagram - 5142505AA
    View related parts
    Product Specifications
    • Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Sensor Brake Fluid Level
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 3.1 x 1.2 x 1.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5142505AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler PT Cruiser Submodels:
    • Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser Brake Fluid Level Sensor Parts and Q&A

  • Q: How to Service and Repair a Brake Fluid Level Sensor on 2008 Chrysler PT Cruiser?
    A: Ensure to look at the recommended service precautions for brakes and traction control before you begin removing or installing the brake fluid level sensor/switch. Unplug the wiring harness connector from the brake fluid level switch in the master cylinder brake reservoir. After that, connect the tabs on both ends of the brake fluid level switch inside the brake fluid reservoir. Pull the brake fluid level switch from its spot on the left side of the brake fluid reservoir.

Related 2008 Chrysler PT Cruiser Parts