How to Remove the Wiper Pulse Module on 2008 Jeep Commander?

Start by emptying power from the engine by taking out the battery negative cable before removing the wiper module. After that, take out both front wiper arms from the wiper pivots. After that, remove the cowl plenum cover/grille panel that covers the front wiper module. Then, unscrew the nut on the inboard end of the front wiper module bracket from the cowl plenum stud. After that, remove the two screws securing the module bracket to the cowl plenum. Separate the wire harness connector from the front wiper panel motor on your car and then take out the wiper module from the cowl plenum as one piece.

OEM 2008 Jeep Commander Wiper Pulse Module

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Pulse Module found

View related parts
2008 Jeep Commander Module Part Number: 5026087AE
$168.82 MSRP: $254.00
You Save: $85.18 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - Rain Sensor; Wiper Pulse Module
- Replaces: 5026087AD, 5026087AB, 5026087AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5026087AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Wiper Pulse Module Parts and Q&A

Q: How to Remove the Wiper Pulse Module on 2008 Jeep Commander?
A: Start by emptying power from the engine by taking out the battery negative cable before removing the wiper module. After that, take out both front wiper arms from the wiper pivots. After that, remove the cowl plenum cover/grille panel that covers the front wiper module. Then, unscrew the nut on the inboard end of the front wiper module bracket from the cowl plenum stud. After that, remove the two screws securing the module bracket to the cowl plenum. Separate the wire harness connector from the front wiper panel motor on your car and then take out the wiper module from the cowl plenum as one piece.