Other Name: Line - A/C Suction And Liquid; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction And Liquid
Replaces: 55056587AB
Item Weight: 1.60 Pounds
Item Dimensions: 3.8 x 6.6 x 40.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55056587AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
2008 Jeep Wrangler A/C Hose Parts and Q&A
Q: How to Safely Service and Repair an A/C Hose Discharge Line on 2008 Jeep Wrangler?
A: The first step to working on the discharge line is to separate and isolate the negative battery cable. Take out the refrigerant from the system it is used in. After that, remove the engine wire harness connector attached to the A/C pressure transducer on the A/C discharge line next to the compressor. Should you find it necessary, unscrew the A/C pressure transducer and chuck its O-ring seal into the rubbish. Get rid of the nuts at the connections between the A/C discharge line and the A/C condenser and A/C compressor. Remove the A/C liquid line from both the A/C condenser and A/C compressor, throwing away the O-ring seals and gaskets. After that, install plugs in or securely cover the fittings and the ports on the condenser and compressor using tape.