Other Name: Extender - Seat Belt; Seat Belt Extension, Center, Front, Rear; Extender Seat Belt Center And Left Seat; Extender Seat Belt Rear; Extender Seat Belt
Position: Center
Item Weight: 0.90 Pounds
Item Dimensions: 10.3 x 3.2 x 1.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5083695AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
Other Name: Seat Belt - Child Seat; Seat Belt Retractor Cover, Rear; Tether Child Seat
Position: Rear
Item Weight: 0.80 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 55350981AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
| Page 1 of 2 |Next >
1-20 of 31 Results
2009 Dodge Dakota Seat Belt Parts and Q&A
Q: Are You Ensuring Proper Installation and Safety When Removing Your Seat Belt on 2009 Dodge Dakota?
A: Before removing the seat belt, check that everything is correctly installed and all fasteners are tight and replace any cut, torn or frayed belt. Pull the right front outboard seat as far forward as you can to use the front center seat belt lower anchor screw more easily. Take out the screw that holds the seat belt lower anchor to the bracket under the center seat in the back from behind the front seat. After that, pull the loose end and the tip of the front center seat belt away from the elastic strap fixed to the side of the center seat cushion. At last, take out the seat belt and pull down the lower anchor through the hole in the side of the front center seat cushion trim. Replace faulty or worn parts from the Chrysler Mopar Parts Catalog to keep accidents and injuries from happening.