JeepParts
My Garage
My Account
Cart
OEM 2009 Jeep Commander Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Evaporators found
2009 Jeep Commander Evaporator Core Part Number: 68057726AA
$330.33 MSRP: $528.00You Save: $197.67 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Evaporatr - A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator; Evaporator A/C
- Replaces: 68046426AA, 5183220AA, 5183220AB
- Item Weight: 3.10 Pounds
- Item Dimensions: 15.3 x 13.0 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68057726AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2009 Jeep Commander Evaporator Core, Front Part Number: 5143096AC
$525.98 MSRP: $798.00You Save: $272.02 (35%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Evaporato - A/C Evaporator Core, Front; Repair Kit.
- Position: Front
- Replaces: 5143096AA, 5143096AB
- Item Weight: 6.10 Pounds
- Item Dimensions: 11.4 x 12.3 x 21.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143096AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2009 Jeep Commander Evaporator Parts and Q&A
- Q: How to Install an Evaporator in the Rear A/C and Maintain Correct Refrigerant Oil Levels on 2009 Jeep Commander?A: Before putting in the rear evaporator, carefully balance the refrigerant oil level to stop A/C problems and protect the compressor. For an A/C evaporator replacement only at the rear, add 30 milliliters (1 fluid ounce) of recommended refrigerant oil to the system. If you replace several A/C components, check the chart to get the correct amount of oil to use. Anytime you open a refrigerant line, remember to replace the O-ring seals and gaskets to stop refrigerant leaks. Position the back A/C evaporator into the center of the rear HVAC housing. Soak new rubber O-ring seals in refrigerant oil and put them on the fittings on the evaporator tube, selecting only the proper O-rings for this system. After making the HVAC housing for the back, put it in place as indicated. Whenever replacing the rear A/C evaporator, use only the refrigerant oil type recommended for your A/C compressor and add the recommended amount of oil.
Related 2009 Jeep Commander Parts
2009 Jeep Commander Blend Door Actuator
2009 Jeep Commander Blower Motor
2009 Jeep Commander Blower Motor Resistor
2009 Jeep Commander Heater Core
2009 Jeep Commander A/C Accumulator
2009 Jeep Commander A/C Clutch
2009 Jeep Commander A/C Compressor
2009 Jeep Commander A/C Condenser
2009 Jeep Commander A/C Expansion Valve
2009 Jeep Commander A/C Hose
2009 Jeep Commander A/C Switch
2009 Jeep Commander HVAC Pressure Switch