Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Jeep Commander Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blend Door Actuators found

  • 2009 Jeep Commander Blend Door Actuator - 5143192AA
    2009 Jeep Commander Blend Door Actuator - 5143192AA
    2009 Jeep Commander Blend Door Actuator - 5143192AA
    2009 Jeep Commander Blend Door Actuator - 5143192AA
    2009 Jeep Commander Blend Door Actuator - 5143192AA
    2009 Jeep Commander Blend Door Actuator Diagram - 5143192AA
    View related parts

    2009 Jeep Commander Actuator, Front Part Number: 5143192AA

    $112.24 MSRP: $167.00
    You Save: $54.76 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door and Heater Blend Door Actuator.; Actuator A/C And Heater
    • Position: Front
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 3.9 x 4.1 x 5.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5143192AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2009 Jeep Commander Blend Door Actuator - 5183152AA
    2009 Jeep Commander Blend Door Actuator Diagram - 5183152AA
    View related parts

    2009 Jeep Commander Actuator Part Number: 5183152AA

    $32.35 MSRP: $51.25
    You Save: $18.90 (37%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator - Fuel Control; HVAC Blend Door Actuator; Actuator A/C And Heater
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 5.6 x 4.1 x 2.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183152AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2009 Jeep Commander Blend Door Actuator - 5183151AB
    2009 Jeep Commander Blend Door Actuator Diagram - 5183151AB
    View related parts

    2009 Jeep Commander Door Actuator Part Number: 5183151AB

    $56.64 MSRP: $84.95
    You Save: $28.31 (34%)
    ADD TO CART
    Product Specifications
    • Other Name: Door - Temperature; HVAC Mode Door; Door; Door Temperature Also Used Assembly The Blend Door; Door Temperature
    • Replaces: 5183151AA
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 6.7 x 3.9 x 1.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183151AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Blend Door Actuator Parts and Q&A

  • Q: How to Service and Repair a Blend Door Actuator on 2009 Jeep Commander?
    A: To work on the air door actuator/motor, first position it into the car and install it on the vehicle's left HVAC air distribution housing. In some cases, you will need to rotate the actuator a bit to bring the splines on its output shaft in line with the mode door cam. Screw the mode door actuator to the air distribution box holding it firmly. Connect the HVAC wire harness connector to the actuator and tighten it to 2 Nm (17 in. lbs.). When assembling a LHD model, place the instrument panel silencer on the left driver side, but when assembling an RHD, install the glove box into the instrument panel. Attach the negative battery cable once more and then use a scan tool to activate the Actuator Calibration function. For the next step, place the mode door actuator into the vehicle and mount it to the back of the HVAC air distribution housing, making sure the splines on the actuator's shaft match the pivot shaft of the console air door. Fit the actuator using two screws, 2 Nm (17 in. lbs.) each and link the wire harness connector to the actuator. Connect the instrument panel, attach the negative battery cable and trigger the Actuator Calibration function using a scan tool.

Related 2009 Jeep Commander Parts

Alternate Year Models

+
2008 Jeep Commander Blend Door Actuator 2010 Jeep Commander Blend Door Actuator