How to Service the Wiper Pivot Linkage on 2009 Jeep Commander?

To service the wiper motor linkage, disconnect the battery negative cable, remove the front wiper arms and remove the cowl plenum cover. Then, remove the nut and screws holding the wiper module bracket in place, disconnect the wire harness, and remove the wiper module as a unit.

OEM 2009 Jeep Commander Wiper Pivot

Windshield Wiper Pivot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Pivot found

View related parts
2009 Jeep Commander Pivot Part Number: 68040579AA
Product Specifications
- Other Name: Linkage - Wiper; Wiper Linkage; Pivot And Linkage Wiper
- Item Weight: 2.60 Pounds
- Item Dimensions: 38.8 x 15.6 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68040579AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Wiper Pivot Parts and Q&A

Q: How to Service the Wiper Pivot Linkage on 2009 Jeep Commander?
A: To service the wiper motor linkage, disconnect the battery negative cable, remove the front wiper arms and remove the cowl plenum cover. Then, remove the nut and screws holding the wiper module bracket in place, disconnect the wire harness, and remove the wiper module as a unit.