Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Dodge Caliber Tie Rod End

Steering Rod End
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

  • 2010 Dodge Caliber Tie Rod End - 5183761AD
    2010 Dodge Caliber Tie Rod End - 5183761AD
    2010 Dodge Caliber Tie Rod End - 5183761AD
    2010 Dodge Caliber Tie Rod End - 5183761AD
    2010 Dodge Caliber Tie Rod End - 5183761AD
    2010 Dodge Caliber Tie Rod End Diagram - 5183761AD
    View related parts

    2010 Dodge Caliber Outer Tie Rod Part Number: 5183761AD

    $67.75 MSRP: $99.95
    You Save: $32.20 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: Tie Rod - Outer; Steering Tie Rod End, Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
    • Position: Outer
    • Replaces: 5183761AC, 5183761AB, 68014944AA, 5183761AA, 68141058AA, 5103320AB, 5103320AA, 68033477AA
    • Item Weight: 1.60 Pounds
    • Item Dimensions: 2.5 x 7.9 x 10.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183761AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Tie Rod End Parts and Q&A

  • Q: How to Service and Repair an Outer Tie Rod End on 2010 Dodge Caliber?
    A: When servicing the outer tie rod end, first lift the vehicle, next remove the wheel nuts and then take off the tire and wheel. To detach the outer tie rod, loosen the jam nut and unscrew the nut securing it to the knuckle by making sure the stud is firmly held in place with a wrench while you take off the nut with a wrench. Put Remover, Special Tool 9360, into the tie rod end's screw and remove the tie rod end. Count the number of turns it takes to get the outer tie rod off the inner tie rod. By using this number, you will be able to get the toe close to the alignment when you install them again. Last, separate the outer tie rod from the inner tie rod.

Related 2010 Dodge Caliber Parts

Alternate Year Models

+
2009 Dodge Caliber Tie Rod End 2011 Dodge Caliber Tie Rod End