How to Safely Detach the MAP Sensor from the Intake Manifold on Chrysler Aspen?

You will find the MAP sensor mounted on the front of the intake manifold and attached with an O-ring. The first step is to separate the electrical connection from the sensor. After that, clean the area around the MAP sensor. After that, take out the two sensor bolts that secure the MAP sensor to the intake manifold. Check the O-ring on the pressure sensor as your final step.

How to Service and Repair the MAP Sensor for 3.7L/4.7L Engines on Chrysler Aspen?

Clean the mounting hole for the MAP sensor on the intake manifold when repairing or servicing it on 3.7L/4.7L engines. Then check that the ring seal around the MAP sensor (2) is not cut or torn. Slide the MAP sensor over the locating pin (6) inside the manifold. Place the mounting bolt (8) and tighten it so it reaches a torque of 3 Nm (25 in. lbs.). After that, connect the electrical connector.

OEM Chrysler Aspen MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
Chrysler Aspen M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen MAP Sensor

Choose OEM MAP Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Aspen MAP Sensor is one of the significant parts, which reveal the dependability and power of Chrysler's full-size SUV in the luxury category. This essential device is used to calculate the positive pressure of air within the intake manifold area and relays important information to the vehicle's Engine Control Unit. As a result of accurate calibration of fuel injectors by the volume of air in the combustion process in real time, the Chrysler Aspen MAP Sensor improves the air-fuel mixture, which contributes to the effectiveness and safety of car operation. Applicable to numerous Chrysler Aspen cars - from those with naturally aspirated engines to cars with forced induction engines, MAP Sensor performs a critical function related to accurate metering of fuel, as well as the ignition timing. Due to its efficiency in the measurement of absolute pressure, the sensor gives accurate readings that are very important in the functioning of the vehicle's electronic control systems. The Chrysler Aspen model manufactured in 2006 to 2008 has a great performance, which is enhanced by such engines as 4.7L V8 and 5.7L Hemi V8 and the operation of these engines depends on the MAP Sensor function. First of all, it should be mentioned the features of the Limited HEV, which is the mixed type of Aspen; here, the MAP Sensor reinforces the reliability of fuel economy and electric mode at low speed. Luxurious interior, exterior, and great towing capacities make Chrysler Aspen a car of choice to many people and the MAP Sensor is crucial cog in the efficient functionality of Chrysler Aspen. At large, the Chrysler Aspen MAP Sensor is a nice vehicle that can comfortably provide efficiency in its usage.

Chrysler Aspen MAP Sensor Parts and Q&A

M.A.P. Sensor
68199324AB
Q: How to Safely Detach the MAP Sensor from the Intake Manifold on Chrysler Aspen?
A:
You will find the MAP sensor mounted on the front of the Intake Manifold and attached with an O-ring. The first step is to separate the electrical connection from the sensor. After that, clean the area around the MAP sensor. After that, take out the two sensor bolts that secure the MAP sensor to the intake manifold. Check the O-ring on the pressure sensor as your final step.
M.A.P. Sensor
56041018AD
Q: How to Service and Repair the MAP Sensor for 3.7L/4.7L Engines on Chrysler Aspen?
A:
Clean the mounting hole for the MAP sensor on the Intake Manifold when repairing or servicing it on 3.7L/4.7L engines. Then check that the ring seal around the MAP sensor (2) is not cut or torn. Slide the MAP sensor over the locating pin (6) inside the manifold. Place the mounting bolt (8) and tighten it so it reaches a torque of 3 Nm (25 in. lbs.). After that, connect the electrical connector.