How to Remove and Install Lateral Links on Chrysler 300?

To take out the left toe link, lift and support the car, remove the nuts of the wheel mount and remove the rear tire and wheel assembly. Before you start on the fuel system, first take out the fuel filler tube and then use jack stands to support the forward part of the engine cradle. If your vehicle has dual exhaust, slide a jack or stand under the muffler, unhook the exhaust isolators and let the exhaust fall onto the jack or stand. Put the jack beneath the center point of the differential, lift it into contact with the differential and hold it in place. Unfasten the shock absorber mounting bolt and nut and next remove the bolts attaching the crossmember to the repair side of the car, making sure to not loosen the bolts on the other side. Lift the vehicle slightly and move the jack back down a little so you can see and reach the toe link bolt on the crossmember and take away the wheel speed sensor cable if present. As you grip the toe adjustment cam bolt, remove the nut fastening the toe link where it attaches to the crossmember, slide the cam to the rear and remove the bolt where it is fastened, then pull the tube out of the knuckle finally. For this side, repeat steps 1 to 3, elevate the vehicle, remove the wheel and remove the wheel speed sensor cable if you see one on the nut. Remove the nut at the crossmember after securing the toe adjustment cam bolt, move the cam bolt back and take out the bolt and nut at the knuckle. First, connect the crossmember end of the link to the box bracket, add the cam bolt and fasten the link to the knuckle, leaving some room in the nut for later adjustment. Install the cam washer and nut, attaching them to the crossmember with the cam bolt held and add the wheel speed sensor cable if you have it. Slowly lift the jack to fit the coil spring and the underside of the shock absorber into place, install the lower shock bolt and nut without tightening and confirm that the rear crossmember bolts are not switched. Place the crossmember so the mounting bolts are in position and fasten the bolts without tightening them all the way. Measure the distance between the tension link and the body weld flange and change the rear crossmember if required to ensure there are at least 12 mm between them. Prepare by doubling each side crossmember brace bolt to 180 Nm (133 ft. lbs.), lowering the vehicle and connecting the exhaust isolators. Place the fuel filler tube, attache the tires and wheels and make sure the wheel nuts are tightened to 150 Nm (110 ft. lbs.). After lowering the vehicle and placing it on the alignment rack, tighten the nut of the shock absorber lower mounting bolt to 72 Nm (53 ft. lbs.), the crossmember toe link fasteners to 108 Nm (80 ft. lbs.) and the toe link fasteners at the knuckle to 81 Nm (60 ft. lbs.), then do a wheel alignment. Place the end of the crossmember into the box bracket, slide the cam bolt into the link, fasten the link to the knuckle, but keep it loose, attach the cam washer and the nut at the crossmember using the cam bolt, add the wheel speed sensor cable if provided, lift the exhaust at the back to its place, install the wheel and tire assembly and tighten the wheel mounting nuts. When the vehicle is lowered, place it on an alignment rack to secure the toe link fasteners and carry out a wheel alignment.

How to Properly Install a Lateral Link on Chrysler Sebring?

Make certain the cam bolt (3) and the washer are correctly placed in the crossmember before you begin to avoid damaging the system. Start by installing the toe link and pushing the cam bolt through from the front, following the marks or setting the top of the cam at 12 O'clock at the same time. Following this, add the cam washer and nut (1) so you can attach the toe link (2) to the crossmember, but make sure not to tighten anything just yet. After that, add the mounting bolt and nut to link the knuckle to the trailing link, while bending it at the body mount bushing. Do not tighten the nuts yet. Ensure that your vehicle is low on the ground, then set it on an alignment rack or lift and lift it if required to work on the mounting bolts and nuts. Tighten the toe link mounting bolt nut at the knuckle to 105 Nm (77 ft. lbs.) and adjust the wheel alignment when it's necessary. Tighten the toe link mounting cam bolt nut (1) until you achieve 35 Nm (26 ft. lbs.), with the cam bolt (3) head not moving.

OEM Chrysler Lateral Link

Lateral Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

29 Lateral Links found

View related parts
Chrysler Front Lateral Link, Rear Upper Part Number: 68045329AB
$260.59 MSRP: $388.00
You Save: $127.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Tension; Rear Upper Forward Control Arm; Rear Forward Lateral Arm; Suspension Control Arm; Lateral Link.; Front Lateral Arm
- Position: Rear Upper
- Replaces: 4782745AB, 68045329AA
Fits the following Chrysler Models:
- 300 | 2005-2010 | Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Rear Lateral Link, Upper Passenger Side Part Number: 68240574AB
$132.69 MSRP: $200.00
You Save: $67.31 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Camber; Rear Right Lateral Arm and Ball Joint Assembly; Suspension Control Arm; Camber Control Link.; Rear Lateral Arm; Link Assembly Camber; Suspension Control Arm; Control Arm; Lateral Arm
- Position: Rear Upper Passenger Side
- Replaces: 68240574AA
Fits the following Chrysler Models:
- 300 | 2015-2023 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Front Lateral Link, Rear Upper Part Number: 68206294AB
$230.00 MSRP: $340.00
You Save: $110.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Tension; Lateral Arm and Ball Joint Assembly; Rear Upper Control Arm; Lateral Link; Tension Arm; Front Lateral Arm; Link Assembly Tension; Control Arm; Lateral Arm
- Position: Rear Upper
- Replaces: 68206294AA
Fits the following Chrysler Models:
- 300 | 2013-2023 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Link Rod, Rear Part Number: 68079540AF
$61.10 MSRP: $91.65
You Save: $30.55 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Toe; Rear Lower Suspension Control Arm; Rear Lower Lateral Arm; Rear Lateral Arm Nut.; Adjust Link; Link Assembly Toe
- Position: Rear
- Replaces: 68079540AD, 68079540AB, 68079540AA, 68079540AC, 68079540AE
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Rear Lateral Link, Driver Side Part Number: 68241573AB
$90.32 MSRP: $200.00
You Save: $109.68 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Camber; Rear Left Lateral Arm and Ball Joint Assembly; Suspension Control Arm; Camber Control Link.; Rear Lateral Arm; Link Assembly Camber; Lateral Arm
- Position: Rear Driver Side
- Replaces: 68046591AA, 5180567AA, 68241573AA, 68185271AA, 68158139AA
Fits the following Chrysler Models:
- 300 | 2010-2014 | Base, C, C Luxury, C SRT8, Limited, S, SRT8, SRT8 Core, Touring | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Rear Lateral Link, Passenger Side Part Number: 68241572AB
$132.69 MSRP: $200.00
You Save: $67.31 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Camber; Rear Right Lateral Arm and Ball Joint Assembly; Suspension Control Arm; Camber Control Link.; Rear Lateral Arm; Link Assembly Camber; Lateral Arm
- Position: Rear Passenger Side
- Replaces: 5180566AA, 68241572AA, 68158138AA, 68046590AA, 68185270AA
Fits the following Chrysler Models:
- 300 | 2010-2014 | Base, C, C Luxury, C SRT8, Limited, S, SRT8, SRT8 Core, Touring | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Rear Lateral Link, Passenger Side Part Number: 68306530AA
$182.41 MSRP: $272.00
You Save: $89.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Lateral Arm, Rear Right Rearward; Suspension Control Arm; Lateral Link; Control Arm; Lateral Arm; Rear Lateral Arm
- Position: Rear Passenger Side
- Replaces: 5180568AA
Fits the following Chrysler Models:
- 300 | 2010-2011 | Base, C, C SRT8, Limited, S, Touring | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Link Part Number: 68579808AA
$104.75 MSRP: $161.00
You Save: $56.25 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Toe
- Replaces: 68470239AB, 68470239AA
Fits the following Chrysler Models:
- Pacifica | 2021-2025 | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2021-2025 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Rear Lateral Link, Driver Side Part Number: 68306531AA
$182.41 MSRP: $272.00
You Save: $89.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Lateral Arm, Rear Left Rearward; Suspension Control Arm; Lateral Link; Control Arm; Lateral Arm; Rear Lateral Arm
- Position: Rear Driver Side
- Replaces: 5180569AA
Fits the following Chrysler Models:
- 300 | 2010-2011 | Base, C, C SRT8, Limited, S, Touring | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Rear Lateral Arm, Driver Side Part Number: 4743239AB
$232.37 MSRP: $434.00
You Save: $201.63 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Lateral Arm, Rear Left; Suspension Control Arm; Lateral Link; Camber Link; Control Arm; Lateral Arm; Lower Link
- Position: Rear Driver Side
- Replaces: 4743239AA
Fits the following Chrysler Models:
- Pacifica | 2004-2008 | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Front Lower Control Arm, Rear Part Number: 5135566AB
$116.39 MSRP: $167.00
You Save: $50.61 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Rear Lateral; Suspension Control Arm, Rear Lower Rearward; Lateral Link; Lateral Arm; Rear Lower Control Arm; Link Rear Lateral; Suspension Control Arm; Control Arm
- Position: Rear Lower
- Replaces: 5135566AA
Fits the following Chrysler Models:
- Sebring | 2003-2006 | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Front Lateral Link Part Number: 4581248AD
$149.53 MSRP: $215.00
You Save: $65.47 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Lateral Control; Rear Suspension Control Arm; Front Lateral Arm; Control Arm.; Front Lateral Arm
- Position: Front
Fits the following Chrysler Models:
- 300M | 1999-2004 | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
- Concorde | 1998-2004 | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1999-2001 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Lateral Link Part Number: 68579813AA
$104.20 MSRP: $159.00
You Save: $54.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Link - Toe; Link
- Replaces: 68218020AD
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020-2025 | L, LX, LXi | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Front Lateral Link Part Number: 4582525
Product Specifications
- Other Name: Latch Link - Assembly - Front; Front Lateral Rod; Rear Lateral Rod; Link, Assembly Lateral Front (See Note)
Fits the following Chrysler Models:
- Concorde | 1993-1995 | Base | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1994-1995 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1994-1995 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Front Lower Control Arm, Rear Part Number: 5135565AB
Product Specifications
- Other Name: Link - Rear Lateral; Suspension Control Arm, Rear Lower Rearward; Lateral Link; Lateral Arm; Rear Lower Control Arm; Link Rear Lateral; Suspension Control Arm; Control Arm
- Position: Rear Lower
- Replaces: 5135565AA, 4895264AA
Fits the following Chrysler Models:
- Sebring | 2001-2006 | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Rear Lateral Arm, Passenger Side Part Number: 4743238AB
Product Specifications
- Other Name: Link; Lateral Arm, Rear Right; Suspension Control Arm; Lateral Link; Control Arm; Lateral Arm
- Position: Rear Passenger Side
- Replaces: 4743238AA
Fits the following Chrysler Models:
- Pacifica | 2004-2008 | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Link Assembly Part Number: 4582529
Product Specifications
- Other Name: Latch Link; Lateral Link; Front Lateral Link; Front Lateral Rod; Rear Lateral Rod; Link, Assembly Lateral Front (See Note)
Fits the following Chrysler Models:
- Concorde | 1993-1995 | Base | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1994-1995 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1994-1995 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Front Lower Control Arm Part Number: 4626904
Product Specifications
- Other Name: Link - Lateral Control; Lateral Link; Control Arm; Link Lateral Control; Link, Lateral Front
Fits the following Chrysler Models:
- Sebring | 1996-2000 | JX, JXi, LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Front Lateral Link Part Number: 4755009
Product Specifications
- Other Name: Link; Front Lateral Rod; Rear Lateral Rod; Link, Assembly Lateral Front (See Note); Link Lateral Control
Fits the following Chrysler Models:
- Concorde | 1996-1997 | LX, LXi | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1996-1997 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1996 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Rear Lateral Link Part Number: 4755018
Product Specifications
- Other Name: Link; Front Lateral Rod; Rear Lateral Rod; Link, Assembly Lateral Rear 1993-4-5; Link Rear Lateral
Fits the following Chrysler Models:
- Concorde | 1996-1997 | LX, LXi | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1996-1997 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1996 | Base | 6 Cyl 3.5 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 29 Results

Chrysler Lateral Link

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Lateral Link for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

The Chrysler Lateral Link balances the rear wheels when in load, reducing sway and enhancing driver control. Chrysler was born in 1925, and in the process of making each ride seem roomier, calmer, and more useful, brought walk-through space to the minivans, matched price to polish to sedans, and kept studying how taking the ride around town might feel thoughtful and enjoyable. Chrysler is not a motorist that has forgotten how to sweat the ride, smarts of the cabin and support value with changes that do turn the daily leisure drives into leisurely voyages. The Lateral Link serves to tighten the wheel hub laterally, deep under the rear quarter, holds geometry when potholes are hit, tames the side shift, and coordinates the suspension components such that the steering inputs translate directly to the tires, without any undesired nervous lag or fluttering of the body. Since Chrysler believes in balanced handling rather than headline horsepower, the Lateral Link was designed to withstand torsion and maintain camber angles out of shape even in situations where the car is barreling over asymmetrical corners with speed. Each Lateral Link is connected to trailing arms and bushings to absorb road shock but does not bind down; therefore, the axle will swing in a predictable path. That philosophy implies that Chrysler customers feel comfortable in a middle zone between comfort and accuracy, and the Lateral Link silently calculates the sums under each mile.

Chrysler Lateral Link Parts and Q&A

Front Lateral Link, Rear Upper
68045329AB
Q: How to Remove and Install Lateral Links on Chrysler 300?
A:
To take out the left toe link, lift and support the car, remove the nuts of the wheel mount and remove the rear tire and wheel assembly. Before you start on the fuel system, first take out the fuel filler tube and then use jack stands to support the forward part of the engine cradle. If your vehicle has dual exhaust, slide a jack or stand under the muffler, unhook the exhaust isolators and let the exhaust fall onto the jack or stand. Put the jack beneath the center point of the differential, lift it into contact with the differential and hold it in place. Unfasten the shock absorber mounting bolt and nut and next remove the bolts attaching the crossmember to the repair side of the car, making sure to not loosen the bolts on the other side. Lift the vehicle slightly and move the jack back down a little so you can see and reach the toe link bolt on the crossmember and take away the wheel speed sensor cable if present. As you grip the toe adjustment cam bolt, remove the nut fastening the toe link where it attaches to the crossmember, slide the cam to the rear and remove the bolt where it is fastened, then pull the tube out of the knuckle finally. For this side, repeat steps 1 to 3, elevate the vehicle, remove the wheel and remove the wheel speed sensor cable if you see one on the nut. Remove the nut at the crossmember after securing the toe adjustment cam bolt, move the cam bolt back and take out the bolt and nut at the knuckle. First, connect the crossmember end of the link to the box bracket, add the cam bolt and fasten the link to the knuckle, leaving some room in the nut for later adjustment. Install the cam washer and nut, attaching them to the crossmember with the cam bolt held and add the wheel speed sensor cable if you have it. Slowly lift the jack to fit the coil spring and the underside of the shock absorber into place, install the lower shock bolt and nut without tightening and confirm that the rear crossmember bolts are not switched. Place the crossmember so the mounting bolts are in position and fasten the bolts without tightening them all the way. Measure the distance between the tension link and the body weld flange and change the rear crossmember if required to ensure there are at least 12 mm between them. Prepare by doubling each side crossmember brace bolt to 180 Nm (133 ft. lbs.), lowering the vehicle and connecting the exhaust isolators. Place the fuel filler tube, attache the tires and wheels and make sure the wheel nuts are tightened to 150 Nm (110 ft. lbs.). After lowering the vehicle and placing it on the alignment rack, tighten the nut of the shock absorber lower mounting bolt to 72 Nm (53 ft. lbs.), the crossmember toe link fasteners to 108 Nm (80 ft. lbs.) and the toe link fasteners at the knuckle to 81 Nm (60 ft. lbs.), then do a wheel alignment. Place the end of the crossmember into the box bracket, slide the cam bolt into the link, fasten the link to the knuckle, but keep it loose, attach the cam washer and the nut at the crossmember using the cam bolt, add the wheel speed sensor cable if provided, lift the exhaust at the back to its place, install the wheel and tire assembly and tighten the wheel mounting nuts. When the vehicle is lowered, place it on an alignment rack to secure the toe link fasteners and carry out a wheel alignment.
Lateral Link, Rear
5085419AC
Q: How to Properly Install a Lateral Link on Chrysler Sebring?
A:
Make certain the cam bolt (3) and the washer are correctly placed in the crossmember before you begin to avoid damaging the system. Start by installing the toe link and pushing the cam bolt through from the front, following the marks or setting the top of the cam at 12 O'clock at the same time. Following this, add the cam washer and nut (1) so you can attach the toe link (2) to the crossmember, but make sure not to tighten anything just yet. After that, add the mounting bolt and nut to link the knuckle to the trailing link, while bending it at the body mount bushing. Do not tighten the nuts yet. Ensure that your vehicle is low on the ground, then set it on an alignment rack or lift and lift it if required to work on the mounting bolts and nuts. Tighten the toe link mounting bolt nut at the knuckle to 105 Nm (77 ft. lbs.) and adjust the wheel alignment when it's necessary. Tighten the toe link mounting cam bolt nut (1) until you achieve 35 Nm (26 ft. lbs.), with the cam bolt (3) head not moving.