How to Maintain and Fix a Timing Belt Tensioner on Chrysler Sebring?

Begin by getting rid of the timing belt and the timing belt idler pulley to service and repair the timing belt tensioner and pulley. Keep Special Tool 6847 attached to the camshaft sprocket when you remove the bolt and both sprockets. Then, remove the fasteners and take off the covering on the engine's rear timing belt. Disconnect the bolt in the bottom of the timing belt tensioner assembly linking it to the engine and lift out the tensioner as a set unit. Pull back the tensioner assembly so it sits over the timing belt and install the lower mounting bolt without turning it. Get the tensioner in place by first installing one upper bracket mounting bolt (M10) 5 to 7 turns into the tensioner assembly. Tighten the tensioner's lower bolt to 61 Nm (45 ft. lbs.) and afterward take out the upper bolt that helps with alignment. Install and screw the rear timing belt cover with each fastener torqued to the right value. Set the timing belt idler pulley and tighten the mounting bolt to a torque of 61 Nm (45 ft. lbs.). Next, position the camshaft sprockets, secure with Special Tool 6847 and fasten the bolts to 115 Nm (85 ft. lbs.), finally installing the timing belt.

How to Remove and Replace a Timing Belt Tensioner on Chrysler Town & Country?

To change and replace the timing belt tensioner, you must use the steps for timing belt service and repair, starting from taking out the belt and sprockets.

OEM Chrysler Timing Belt Tensioner

Engine Timing Belt Tensioner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Timing Belt Tensioners found

View related parts
Chrysler Belt Tensioner Part Number: 4892109AA
$145.99 MSRP: $219.00
You Save: $73.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Engine Timing Belt Tensioner; Serpentine Belt Drive Kit; Timing Tensioner; Tensioner; Tensioner Belt; Timing Belt Tensioner
- Replaces: 4573347AB
Fits the following Chrysler Models:
- 300 | 2005-2010 | Limited, S, Signature Series, Touring | 6 Cyl 3.5 L GAS
- 300M | 2003-2004 | Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS
- Concorde | 2003-2004 | LXi, Limited | 3.5L V6, 6 Cyl 3.5 L GAS
- Pacifica | 2004-2008 | Base, LX, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
- Sebring | 2007-2010 | Limited | 6 Cyl 3.5 L GAS
- Town & Country | 2008-2010 | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View More
View related parts
Chrysler Belt Tensioner Part Number: 4781570AB
$147.11 MSRP: $221.00
You Save: $73.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Engine Timing Belt Tensioner; Serpentine Drive Kit; Timing Belt Kit; Tensioner Pulley; Tensioner Pulley Bracket; Tensioner; Tensioner Belt; Timing Belt Tensioner
Fits the following Chrysler Models:
- PT Cruiser | 2003-2010 | Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
- Sebring | 2003-2006 | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
- Voyager | 2003 | LX | 4 Cyl 2.4 L GAS
View More
View related parts
Chrysler Belt Tensioner Part Number: 4667283
$88.21 MSRP: $111.82
You Save: $23.61 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Engine Timing Belt Tensioner Hydraulic Assembly; Timing Belt Kit; Tensioner; Tensioner, Timing Belt; Tensionor, Timing Belt; Tensioner Belt
Fits the following Chrysler Models:
- Sebring | 1995-1997 | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Belt Tensioner Part Number: 4573347
$149.56 MSRP: $224.00
You Save: $74.44 (34%)
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Engine Timing Belt Tensioner Hydraulic Assembly; Timing Belt Kit; Tensioner; Tensioner, Timing Belt; Tensioner Belt; Timing Belt Tensioner
Fits the following Chrysler Models:
- 300M | 1999-2002 | Base, Special | 6 Cyl 3.5 L GAS
- Concorde | 1993-2002 | Base, LX, LXi, Limited | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1999-2001, 1994-1997 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1994-1996 | Base | 6 Cyl 3.5 L GAS
- Prowler | 2001-2002 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Belt Tensioner Part Number: MD352473
$45.33 MSRP: $64.85
You Save: $19.52 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Tension Pulley; Tensioner; Tensioner Belt
Fits the following Chrysler Models:
- Sebring | 2001-2005 | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Belt Tensioner Part Number: 5018400AB
$298.74 MSRP: $429.00
You Save: $130.26 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Engine Timing Belt Tensioner; Serpentine Drive Kit; Timing Belt Kit; Tension Pulley; Tensioner Pulley Bracket; Tensioner
- Replaces: 5018400AA
Fits the following Chrysler Models:
- Cirrus | 2000 | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Belt Tensioner Part Number: 1145A070
$104.28 MSRP: $146.90
You Save: $42.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Guide - Timing Belt Tensioner; Engine Timing Belt Tensioner; Serpentine Belt Drive Kit; Timing Belt Kit; Tensioner
- Replaces: 1145A062, MD341830
Fits the following Chrysler Models:
- Cirrus | 1995-2000 | LX, LXi | 6 Cyl 2.5 L GAS
- Sebring | 1995-2005 | JX, JXi, LX, LXi, Limited | 3.0L V6, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Belt Tensioner Part Number: MD104578
$62.16 MSRP: $80.02
You Save: $17.86 (23%)
ADD TO CART
Product Specifications
- Other Name: Tensioner - Valve Timing Belt; Tensioner Pulley, Valve Timing Belt, Single Cam; Tensioner, Timing Belt; Tensioner Belt
Fits the following Chrysler Models:
- Grand Voyager | 2000 | Base, SE | 6 Cyl 3.0 L GAS
- LeBaron | 1990-1995 | Base, GT, GTC, High Line, LE, LX, Landau, Premium | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1989 | Base, Landau | 6 Cyl 3.0 L GAS
- TC Maserati | 1990-1991 | Base | 6 Cyl 3.0 L GAS
- Town & Country | 1990 | Base | 6 Cyl 3.0 L GAS
- Voyager | 2000 | Base | 6 Cyl 3.0 L GAS
View More
View related parts
Chrysler Belt Tensioner Part Number: 4621455
$95.14 MSRP: $120.61
You Save: $25.47 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Serpentine Belt Drive Kit; Timing Belt Kit; Tensioner; Tensioner, Timing Belt
Fits the following Chrysler Models:
- Cirrus | 1995-1996 | LX | 4 Cyl 2.4 L GAS
- Sebring | 1996-1997 | JX, JXi | 4 Cyl 2.4 L GAS
View related parts
Chrysler Belt Tensioner Part Number: 4663515
Product Specifications
- Other Name: Tensioner - Belt; Engine Timing Belt Tensioner Pulley; Idler Pulley; Timing Belt Pulley; Idler Pulley, Tensioner Pulley, Timing Pulley, Tensioner Belt, Engine Timing Belt Tensioner
Fits the following Chrysler Models:
- 300M | 1999-2002 | Base, Special | 6 Cyl 3.5 L GAS
- Concorde | 1995-2002 | Base, LX, LXi, Limited | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1999-2001, 1995-1997 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1995-1996 | Base | 6 Cyl 3.5 L GAS
- Prowler | 2001-2002 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Tension Pulley Part Number: 4612894AG
Product Specifications
- Other Name: Tensioner - Belt; Accessory Drive Belt Tensioner Assembly; Idler Pulley; Serpentine Drive Kit.; Chain Guide; Serpentine Tensioner; Tensioner
- Replaces: 4612894AF, 4612894AE, 4612894AC
Fits the following Chrysler Models:
- Grand Voyager | 2000 | Base, SE | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Imperial | 1990-1993 | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- New Yorker | 1990-1993 | Fifth Avenue, Landau, Salon | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Town & Country | 1996-2000, 1992-1993 | Base, LX, LXi, Limited, SX | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2000 | Base, SE | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Belt Tensioner Part Number: 5018399AA
Product Specifications
- Other Name: Tensioner - Belt; Timing Belt Tensioner; Timing Belt Kit; Tensioner Pulley Bracket; Tensioner
- Replaces: 4777395AC, 5016523AA
Fits the following Chrysler Models:
- Cirrus | 1999
- Sebring | 1998-1999 | LX | 4 Cyl 2.0 L GAS

Chrysler Timing Belt Tensioner

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Timing Belt Tensioner for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Timing Belt Tensioner Parts and Q&A

Belt Tensioner
4781570AB
Q: How to Maintain and Fix a Timing Belt Tensioner on Chrysler Sebring?
A:
Begin by getting rid of the timing belt and the timing belt idler pulley to service and repair the timing belt tensioner and pulley. Keep Special Tool 6847 attached to the camshaft sprocket when you remove the bolt and both sprockets. Then, remove the fasteners and take off the covering on the engine's rear timing belt. Disconnect the bolt in the bottom of the timing belt tensioner assembly linking it to the engine and lift out the tensioner as a set unit. Pull back the tensioner assembly so it sits over the timing belt and install the lower mounting bolt without turning it. Get the tensioner in place by first installing one upper bracket mounting bolt (M10) 5 to 7 turns into the tensioner assembly. Tighten the tensioner's lower bolt to 61 Nm (45 ft. lbs.) and afterward take out the upper bolt that helps with alignment. Install and screw the rear timing belt cover with each fastener torqued to the right value. Set the timing belt idler pulley and tighten the mounting bolt to a torque of 61 Nm (45 ft. lbs.). Next, position the camshaft sprockets, secure with Special Tool 6847 and fasten the bolts to 115 Nm (85 ft. lbs.), finally installing the timing belt.
Belt Tensioner
4892109AA
Q: How to Remove and Replace a Timing Belt Tensioner on Chrysler Town & Country?
A:
To change and replace the timing belt tensioner, you must use the steps for timing belt service and repair, starting from taking out the belt and sprockets.