How Is the Camshaft Position Sensor Installed on a 3.7L Engine on Jeep Commander?

You should first clean the machined hole in the cylinder head before you install the Camshaft Position Sensor for the 3.7L engine. Now, add just a little engine oil to the area of the O-ring on the sensor. Mount the sensor into the cylinder head by using a little rocking and twisting movement so the sensor fits flush against it, so you don't damage the part. Adjust the sensor into place, install the mounting bolt and tighten it to a pressure of 12 Nm (106 in. lbs.). The last step is to link the electrical connector with the sensor.

How to Service and Repair a Camshaft Position Sensor in a 3.7L Engine on Jeep Commander?

The first step to repairing the Camshaft Position Sensor on the 3.7L engine is to clean the machined hole on the cylinder head. Coat the sensor's O-ring with a small amount of oil and then place it into the cylinder head by moving it back and forth slightly and rotating it as you go. The sensor should be snug up against the cylinder head's surface before bolting it down to keep the sensor mounting tang intact. Install the mounting bolt and tighten it with a torque of 12 Nm (106 in. lbs.), afterwards attach the electrical connector to the sensor.

OEM Jeep Commander Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
Jeep Commander Camshaft Position Sensor Part Number: 5149054AC
$34.88 MSRP: $51.70
You Save: $16.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149054AA, 5149054AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Camshaft Position Sensor Part Number: 56041584AF
$105.20 MSRP: $158.00
You Save: $52.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Camshaft
- Replaces: 56041584AE, 56028133AE, 56028133AD, 56041584AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Camshaft Position Sensor

Choose OEM Camshaft Position Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Camshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Camshaft Position Sensor is a famous part considered to be highly reliable in many Jeep Commander versions of the XK and the 2022 Meridian. This sensor checks and supervises the position and rate of the camshaft and sends invulnerable information to the ECM with the aim of controlling the fuel deliveries and the sequence of sparking. The Camshaft Position Sensor, as a result of assuring accurate coordination of the crankshaft and camshaft, plays a critical role of boosting the performance and security of a car's engine. What is more, it is generally located above the camshaft or nearby the engine block, so readings provided by the sensor are accurate, which is extremely important to achieve maximum power. The Jeep Commander, intended for framer and travelling lovers, is to be profited from a capacity of this sensor to work with V6 and V8 engines and with diesel versions available in some markets. Specifically, Camshaft Position Sensor can be identified as one of the leading products on the automotive market due to its durability and flexibility, which is provided to give the drivers the optimal experience both during their daily routine, and during the off-roading. Because this Camshaft Position Sensor increases performance, safety, it can help Jeep get its name out and show that Jeep knows how to design vehicles for the superior quality and resolutions; thus, the Camshaft Position Sensor is a tool that cannot be left out of Jeep vehicles.

Jeep Commander Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
5149054AC
Q: How Is the Camshaft Position Sensor Installed on a 3.7L Engine on Jeep Commander?
A:
You should first clean the machined hole in the cylinder head before you install the Camshaft Position Sensor for the 3.7L engine. Now, add just a little engine oil to the area of the O-ring on the sensor. Mount the sensor into the cylinder head by using a little rocking and twisting movement so the sensor fits flush against it, so you don't damage the part. Adjust the sensor into place, install the mounting bolt and tighten it to a pressure of 12 Nm (106 in. lbs.). The last step is to link the electrical connector with the sensor.
Camshaft Position Sensor
56041584AF
Q: How to Service and Repair a Camshaft Position Sensor in a 3.7L Engine on Jeep Commander?
A:
The first step to repairing the Camshaft Position Sensor on the 3.7L engine is to clean the machined hole on the cylinder head. Coat the sensor's O-ring with a small amount of oil and then place it into the cylinder head by moving it back and forth slightly and rotating it as you go. The sensor should be snug up against the cylinder head's surface before bolting it down to keep the sensor mounting tang intact. Install the mounting bolt and tighten it with a torque of 12 Nm (106 in. lbs.), afterwards attach the electrical connector to the sensor.