How to Properly Replace the Engine Control Module for 3.7/4.7/5.7L Engines on Jeep Commander?

It is important to remove the connection from the ABS CAB momentarily when changing the PCM for 3.7/4.7/5.7L engines, to stop DTC issues with the VIN. Without restarting the vehicle, use the diagnostic scanner to write the VIN to the PCM from the engine menu by going to "1". After "Miscellaneous," choose "Check VIN," and confirm the VIN is entered correctly. Then, turn off the ignition, reconnect the ABS and start the engine again. Secure clip 4 to pin 5 before putting the PCM into place and fixing it with the two bolts 2. Then set the ground strap 3 in place before tightening the bolts to 4 Nm (35 in. lbs.). Make sure none of the pin connectors have corroded or been damaged and clean them before inserting the 38-way connectors 2 into the PCM. Lastly, attach the negative cable to the battery and reset the new PCM using the vehicle's original VIN and mileage in a scan tool to stop a Diagnostic Trouble Code (DTC) from appearing.

How to Service and Repair the Engine Control Module for 3.7/4.7/5.7L Engines on Jeep Commander?

Start by taking out the negative battery cable to prevent damage from any voltage spike during Engine Control Module service and repair for 3.7/4.7/5.7L engines. Unplug the ABS CAB when installing a new PCM, as it can stop problems with DTCs due to the VIN broadcast. Since the new PCM already has the VIN and mileage from your old PCM, all you need to do is use a scanner to ensure the correct VIN is written into the new PCM before connecting the ABS module again. The right-front inner fender, next to the engine, is where you will find the PCM. Unplug the 38-way connectors on the PCM, then pop the clip off the nearby locating pin which you would have used as one of the mounting bolts. Unscrew the two bolts holding the PCM to the mount, pull the PCM out and set the ground strap down by your side.

OEM Jeep Commander Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Engine Control Modules found

View related parts
Jeep Commander Control Module Part Number: 5150500AA
$809.28 MSRP: $1245.00
You Save: $435.72 (35%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: RL150500AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Commander | Limited, Sport | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: R5150255AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150255AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Jeep Commander | Limited, Sport | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Transmission Controller Part Number: RL094354AF
Product Specifications
- Other Name: Module - Powertrain Control; Transmission Control Module; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaced by: 5094354AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Commander | Base, Limited, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 5094354AF
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5094354AD, 5094354AC, 5094354AE, RL094354AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Commander | Base, Limited, Sport | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Control Module Part Number: R6044743AD
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module (ECM); Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 56044749AC, 56044752AC, RL044743AD, 56044743AD, 56044743AC, 56044743AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 4.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 5150390AE
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150390AA, 5150426AF, RL150390AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Jeep Commander | Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: R5094611AF
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 5094611AC, 5094611AF, 5094611AD, RL094611AF, 5094611AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Commander | Base, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Control Module Part Number: R5150302AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 5150302AC, RL150302AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Commander | Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Control Module Part Number: RL150258AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5150258AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Commander | Limited, Overland | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 5150467AB
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 5150467AA, RL150467AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 5094870AE
Product Specifications
- Other Name: Module - Powertrain Control; ECM
- Replaces: 5094870AB, 5094870AD, 5094870AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Commander | Limited, Overland | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Control Module Part Number: 5094895AB
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module (ECM); Engine Control Module; PCM; ECM
- Replaces: 56044742AB, 56029227AC, 56044742AD, 56029227AB, 5094895AA, 56044742AC, RL094895AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base | 3.7L V6, 6 Cyl 3.7 L GAS

Jeep Commander Engine Control Module

Choose OEM Engine Control Module that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Engine Control Module follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Engine Control Module or the Jeep Commander ECM is one of the most trusted and powerful part controlling the effective performance of several models of jeep commander. This critical component controls functions as air-fuel combination, ignition sequence and idle speed that makes the Jeep Commander run optimally. The microprocessor based systems in the ECMs have matured a great deal to incorporate solutions such asVari-belt and VTEC that control features such as valve timing that catalyse both, performance and fuel economy enhancements. Compatibility is an area of strength when it comes to the Engine Control Module with the Model available being compatible with Jeep Commander XK as well as the 2022 Model. This increases the flexibility of the vehicle not only making the vehicle easy to maintain but also increasing the safety and performance of the vehicle. The Engine Control Module is an important feature concerning management of its parameters: the degree of fuel enrichment, etc; this, in turn, leads to better fuel efficiency and lower emissions, an advantage in the market for automobiles. Also, the fact that the market offers new and remanufactured ECMs guarantees f Jeep car owners to get everything they need in terms of direct-fit and universal ECMs. Hence, with the additional features like reliability, technology, and compatibility the Engine Control Module has proved to be among the most suitable for those who own the Jeep Commander car models to enhance their performance.

Jeep Commander Engine Control Module Parts and Q&A

Transmission Controller
RL094354AF
Q: How to Properly Replace the Engine Control Module for 3.7/4.7/5.7L Engines on Jeep Commander?
A:
It is important to remove the connection from the ABS CAB momentarily when changing the PCM for 3.7/4.7/5.7L engines, to stop DTC issues with the VIN. Without restarting the vehicle, use the diagnostic scanner to write the VIN to the PCM from the engine menu by going to "1". After "Miscellaneous," choose "Check VIN," and confirm the VIN is entered correctly. Then, turn off the ignition, reconnect the ABS and start the engine again. Secure clip 4 to pin 5 before putting the PCM into place and fixing it with the two bolts 2. Then set the ground strap 3 in place before tightening the bolts to 4 Nm (35 in. lbs.). Make sure none of the pin connectors have corroded or been damaged and clean them before inserting the 38-way connectors 2 into the PCM. Lastly, attach the negative cable to the battery and reset the new PCM using the vehicle's original VIN and mileage in a scan tool to stop a Diagnostic Trouble Code (DTC) from appearing.
Control Module
5094354AF
Q: How to Service and Repair the Engine Control Module for 3.7/4.7/5.7L Engines on Jeep Commander?
A:
Start by taking out the negative Battery Cable to prevent damage from any voltage spike during Engine Control Module service and repair for 3.7/4.7/5.7L engines. Unplug the ABS CAB when installing a new PCM, as it can stop problems with DTCs due to the VIN broadcast. Since the new PCM already has the VIN and mileage from your old PCM, all you need to do is use a scanner to ensure the correct VIN is written into the new PCM before connecting the ABS module again. The right-front inner fender, next to the engine, is where you will find the PCM. Unplug the 38-way connectors on the PCM, then pop the clip off the nearby locating pin which you would have used as one of the mounting bolts. Unscrew the two bolts holding the PCM to the mount, pull the PCM out and set the ground strap down by your side.