How to Service and Repair the A/C Switch Control Assembly on 2001 Dodge Durango?

Before starting control assembly servicing or repairs, first remove the battery negative cable by disconnecting it. First, get rid of the cluster bezel from the dashboard and then remove the four screws keeping the heater-A/C control connected to the cluster. Take out the wire connector from the back of the heater-A/C control and pull the control off the instrument panel. To connect the wire harness, return it to the A/C control and position the control in the bezel, securing it with the four 2.2 Nm (17 in. lbs.) screws, provided. Put the cluster bezel back into the instrument panel and reattached the cable going from the battery to the negative terminal. Carry out the A/C cool down test using the DRB III in the end.

OEM 2001 Dodge Durango A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C Switches found

View related parts
2001 Dodge Durango Heater Control, Rear Part Number: 55056249AE
Product Specifications
- Other Name: Control - A/C And Heater - Auxiliary; HVAC Temperature Control Panel; Climate Control Module; Blower Switch; Dash Control Unit
- Position: Rear
- Replaces: 55055904AE, 55055904AC, 55055904AB, 55056249AD, 55055904AD, 55056249AC, 55055904AA, 55056249AA, 55056249AB
- Item Weight: 1.90 Pounds
- Item Dimensions: 12.9 x 5.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55056249AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Heater Control, Front Part Number: 55056250AE
Product Specifications
- Other Name: Control - A/C And Heater With Zone; HVAC Temperature Control Panel, Front; Climate Control Module; Blower Control Switch; Dash Control Unit
- Position: Front
- Replaces: 55056250AA, 55055907AA, 55055907AB, 55056250AC, 55056250AB, 55055907AE, 55055907AC, 55056250AD, 55055907AD
- Item Weight: 1.90 Pounds
- Item Dimensions: 12.9 x 5.8 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55056250AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Knob Part Number: UJ95TL2AA
Product Specifications
- Other Name: Knob - A/C And Heater Control - Ro; Knob A/C And Heater Control - Rotary
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UJ95TL2AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Control Module Part Number: 5HA50TL2AA
Product Specifications
- Other Name: Control - A/C And Heater - Auxiliary; A/C Control Switch; Control; Control A/C And Heater - Auxiliary
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HA50TL2AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Durango A/C Switch Parts and Q&A

Q: How to Service and Repair the A/C Switch Control Assembly on 2001 Dodge Durango?
A: Before starting control assembly servicing or repairs, first remove the battery negative cable by disconnecting it. First, get rid of the cluster bezel from the dashboard and then remove the four screws keeping the heater-A/C control connected to the cluster. Take out the wire connector from the back of the heater-A/C control and pull the control off the instrument panel. To connect the wire harness, return it to the A/C control and position the control in the bezel, securing it with the four 2.2 Nm (17 in. lbs.) screws, provided. Put the cluster bezel back into the instrument panel and reattached the cable going from the battery to the negative terminal. Carry out the A/C cool down test using the DRB III in the end.