How to Service and Repair an Air Bag Control Module on 2003 Chrysler PT Cruiser?

To get started, open the hood and remove the negative battery cable for at least two minutes to let the system capacitor discharge. After that, take out the ORC module by loosening the nuts and eyes holding it, unplug the connector, then remove the module. Connect the ORC connector making sure you push the locking tabs into place. After that, only use the nuts that come with your wheels and your car when fitting them. Place the ORC so the arrow points forward in its console floor bracket, put in the ground eyelet and tighten its two nuts to a torque of 9.6 to 14 Nm (85 to 125 in. lbs.). Install the center console, meaning the area under the dash, but make sure not to connect the battery negative cable. When done, close the hood and look for normal operation in the vehicle and its systems.

OEM 2003 Chrysler PT Cruiser Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Control Modules found

View related parts
2003 Chrysler PT Cruiser Control Module Part Number: 4671419AF
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; SDM Module; Module Air Bag Control
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671419AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2003 Chrysler PT Cruiser Control Module Part Number: 4671419AE
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; SDM Module
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.8 x 6.4 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671419AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler PT Cruiser Submodels:
- Base, Dream, GT, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2003 Chrysler PT Cruiser SDM Module Part Number: 4896520AC
Product Specifications
- Other Name: Module - Air Bag Control
- Replaces: 4896520AB, 4671776AF, 4671776AD, 4671776AE, 4896520AA
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.4 x 6.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896520AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2003 Chrysler PT Cruiser Air Bag Control Module Parts and Q&A

Q: How to Service and Repair an Air Bag Control Module on 2003 Chrysler PT Cruiser?
A: To get started, open the hood and remove the negative battery cable for at least two minutes to let the system capacitor discharge. After that, take out the ORC module by loosening the nuts and eyes holding it, unplug the connector, then remove the module. Connect the ORC connector making sure you push the locking tabs into place. After that, only use the nuts that come with your wheels and your car when fitting them. Place the ORC so the arrow points forward in its console floor bracket, put in the ground eyelet and tighten its two nuts to a torque of 9.6 to 14 Nm (85 to 125 in. lbs.). Install the center console, meaning the area under the dash, but make sure not to connect the battery negative cable. When done, close the hood and look for normal operation in the vehicle and its systems.