Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2003 Dodge Durango Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

  • 2003 Dodge Durango Blend Door Actuator - 4885206AB
    2003 Dodge Durango Blend Door Actuator - 4885206AB
    2003 Dodge Durango Blend Door Actuator Diagram - 4885206AB
    View related parts

    2003 Dodge Durango Door Actuator Part Number: 4885206AB

    $137.09 MSRP: $202.00
    You Save: $64.91 (33%)
    Product Specifications
    • Other Name: Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator; Servo; A/C and Heater Actuator with Bracket, Lever, and Recirculation Door.
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 1.9 x 3.6 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4885206AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Dodge Durango Submodels:
    • Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Blend Door Actuator Parts and Q&A

  • Q: How to Replace the Blend Door Actuator in a Dual Zone HVAC System on 2003 Dodge Durango?
    A: Before touching the blend door actuators, disable the air bag system by pulling the battery negative cable and allow at least two minutes after unplugging the cable for the air bag system to become safe. First, roll the Instrument Panel Assembly back and take out the HVAC unit from your vehicle. After that, unscrew the blend actuators and drive shaft from the blend door and then take out the upper part of the housing. Pull the blend air module out of its space in the housing unit. To install the drive shaft and blend actuators, attach the shaft to the blend air door, bolt on the actuators to the distribution housing and tighten all the screws to 2 Nm (17 in. lbs.). Attach the HVAC wire harness connector to the blend door actuator connector receptacle, move the Instrument Panel Assembly back toward the front and finally replace the negative cable on the battery.

Related 2003 Dodge Durango Parts

Alternate Year Models

+
2002 Dodge Durango Blend Door Actuator 2004 Dodge Durango Blend Door Actuator