Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Dodge Durango Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

  • 2004 Dodge Durango Blend Door Actuator - 4885206AB
    2004 Dodge Durango Blend Door Actuator - 4885206AB
    2004 Dodge Durango Blend Door Actuator Diagram - 4885206AB
    View related parts

    2004 Dodge Durango Door Actuator Part Number: 4885206AB

    $137.09 MSRP: $202.00
    You Save: $64.91 (33%)
    Product Specifications
    • Other Name: Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator; Servo; A/C and Heater Actuator with Bracket, Lever, and Recirculation Door.
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 1.9 x 3.6 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4885206AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2004 Dodge Durango Submodels:
    • Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Durango Blend Door Actuator Parts and Q&A

  • Q: How to Service and Repair a Blend Door Actuator on 2004 Dodge Durango?
    A: The first step in working on an air door actuator/motor is to remove and separate the negative battery cable. After that, take out the instrument panel assembly. Next, remove those four screws holding the blend door actuator to the top of the HVAC housing and cut the HVAC wire harness connector from the actuator. Once you have the blend door, pull the actuator out from the HVAC housing. Install the blend door actuator on top of the HVAC housing, so that the actuator output shaft matches the position of the blend-air door linkage. Use 2 Nm (17 in. lbs.) of tightness as you secure the screws, making sure they hold the actuator in its place in the HVAC housing. Secure the wire harness connector for the HVAC to the blend door actuator and put back the instrument panel assembly. After that, put the negative battery cable back where it belonged. Operating the DRM lll is essential for the heater-A/C control calibration procedure.

Related 2004 Dodge Durango Parts

Alternate Year Models

+
2003 Dodge Durango Blend Door Actuator 2005 Dodge Durango Blend Door Actuator