How to Service and Repair a Front Parking Brake Cable on 2004 Jeep Grand Cherokee?

Take off the center console and gently lift the rear seat together with the carpet that's over the parking brake cables. Using a screwdriver, pull back the front cable on the inside of the safe through its eyelet, just as an assistant opens the lock out spring on the outside. After that, unplug the front cable end from the equalizer and the parking brake lever and take off the front carpet. Unscrew the nuts on the front cable retainers from the floor, use a 13 mm wrench to squeeze the holders and gently remove the cable from the parking brake lever bracket and equalizer bracket. Place the new cable into the brackets at the parking brake and equalizer. After that, secure the cable to the floor pan with retainer nuts and attach the front to the parking brake lever and equalizer. After you've installed the front carpet, pull the lever to release the lock out spring and then slide the center console back in place. Next, fold the rear carpet cover and seat down.

OEM 2004 Jeep Grand Cherokee Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2004 Jeep Grand Cherokee Rear Cable Part Number: 52128119AE
$25.13 MSRP: $45.95
You Save: $20.82 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52128119AD, 52128119AC
- Item Weight: 2.90 Pounds
- Item Dimensions: 16.6 x 16.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128119AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Jeep Grand Cherokee Rear Cable Part Number: 52128118AF
$33.52 MSRP: $49.20
You Save: $15.68 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52128118AC, 52128118AD
- Item Weight: 1.50 Pounds
- Item Dimensions: 48.4 x 1.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128118AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Jeep Grand Cherokee Front Cable Part Number: 52128243AD
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52128243AC
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.3 x 3.5 x 35.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128243AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2004 Jeep Grand Cherokee Parking Brake Cable Parts and Q&A

Q: How to Service and Repair a Front Parking Brake Cable on 2004 Jeep Grand Cherokee?
A: Take off the center console and gently lift the rear seat together with the carpet that's over the parking brake cables. Using a screwdriver, pull back the front cable on the inside of the safe through its eyelet, just as an assistant opens the lock out spring on the outside. After that, unplug the front cable end from the equalizer and the parking brake lever and take off the front carpet. Unscrew the nuts on the front cable retainers from the floor, use a 13 mm wrench to squeeze the holders and gently remove the cable from the parking brake lever bracket and equalizer bracket. Place the new cable into the brackets at the parking brake and equalizer. After that, secure the cable to the floor pan with retainer nuts and attach the front to the parking brake lever and equalizer. After you've installed the front carpet, pull the lever to release the lock out spring and then slide the center console back in place. Next, fold the rear carpet cover and seat down.