OEM 2005 Dodge Dakota Blower Motor

A/C Heater Blower Motor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

  • 2005 Dodge Dakota Blower Motor Diagram - 5161007AB
    View related parts

    2005 Dodge Dakota Blower Motor Part Number: 5161007AB

    $201.67 MSRP: $301.00
    You Save: $99.33 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Motor - Blower With Wheel; HVAC Blower Motor; Blower Assembly; Motor Blower With Wheel; Motor Blower
    • Replaces: 5161007AA
    • Item Weight: 5.40 Pounds
    • Item Dimensions: 10.3 x 11.7 x 12.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5161007AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2005 Dodge Dakota Blower Motor Parts and Q&A

  • Q: How to Service the Blower Motor While Ensuring the Airbag System is Disabled on 2005 Dodge Dakota?
    A: If the vehicle has air bags, begin by cutting off the car's air bag system by isolating the negative battery cable and waiting two minutes for the system's capacitor to dissipate. Disconnect the wire harness connector from the blower motor, remove the three screws holding it in place and take out the blower motor. To make the installation, fit the blower motor into the housing and use the three screws to hold it in place, tightening them to 2 N.m (17 in. lbs.). After that, link the wire harness connector to the blower motor and lastly put the battery cable back in place.

Related 2005 Dodge Dakota Parts