How to Service and Repair a Transmission Speed Sensor for Output on 2005 Dodge Dakota?

To work on the transmission speed sensor, lift the car up safely before putting a fitting catch pan under the transmission. After disconnecting the wiring connector from output speed sensor 1, take the bolt out which secures the sensor to the case and remove the sensor. Install the output speed sensor 1 inside the transmission case and then fix it with the bolt, turning it to 11.9 Nm (105 inch lbs.). Attach the wiring connector to output speed sensor 1, make sure the fluid is sufficient and top up the fluid as required before bring the vehicle back to the ground.

OEM 2005 Dodge Dakota Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2005 Dodge Dakota Speed Sensor, Rear Part Number: 5032220AC
Product Specifications
- Other Name: Sensor - Wheel Speed; Rear ABS Wheel Speed Sensor; Anti-Lock Braking System.; Rear Speed Sensor
- Position: Rear
- Replaced by: 5032220AD
- Replaces: 5032220AA, 5032220AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5032220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Dakota Sensor - Wheel Speed Part Number: 5032220AD
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- SKU: 5032220AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2005 Dodge Dakota Speed Sensor Parts and Q&A

Q: How to Service and Repair a Transmission Speed Sensor for Output on 2005 Dodge Dakota?
A: To work on the transmission speed sensor, lift the car up safely before putting a fitting catch pan under the transmission. After disconnecting the wiring connector from output speed sensor 1, take the bolt out which secures the sensor to the case and remove the sensor. Install the output speed sensor 1 inside the transmission case and then fix it with the bolt, turning it to 11.9 Nm (105 inch lbs.). Attach the wiring connector to output speed sensor 1, make sure the fluid is sufficient and top up the fluid as required before bring the vehicle back to the ground.