Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Front; Blower Assembly; Motor Blower With Wheel And Cap; HVAC Blower Motor
Position: Front
Item Weight: 5.60 Pounds
Item Dimensions: 11.5 x 11.4 x 9.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5061381AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Other Name: Housing - A/C And Heater; HVAC Unit Case, Front Upper; HVAC Unit Case Assembly; Housing Assembly; Case Assembly; A/C & Heater Case
Position: Front Upper
Replaces: 68019146AA, 5166115AA
Item Weight: 9.90 Pounds
Item Dimensions: 40.8 x 22.1 x 26.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68057727AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
Adventurer, Limited, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2005 Dodge Durango Blower Motor Parts and Q&A
Q: How to Service and Repair a Rear Blower Motor on 2005 Dodge Durango?
A: First, disconnect and isolate the battery's negative cable before working on the rear blower motor. Draw out the rear HVAC housing and break the connector to the rear blower motor. After that, remove the three screws which fasten the rear blower motor to the air inlet housing and pull out the motor. Carefully put the rear blower motor into place in the rear air inlet housing and attach it with three screws, tightening them to 2.2 N.m (20 in. lbs.). Join the end of the rear HVAC wiring harness to the rear blower motor, attach the rear half of the HVAC housing and then attach the minus end of the battery cable.