How to Maintain the Seat Heater Switch for the Passenger Seat on 2005 Jeep Liberty?

Before beginning any service, remove the negative battery cable from the car. Either from under the seat or from under the car, take off the shield that covers the heated seat control and pull the wiring connector off the heated seat switch by depressing the lock. Gently rock the switch from the bottom to pull it out of its place. First, gently move the seat switch back and forth to get it into position and then link the hot seat switch electrical connector. Put in place the seat cushion side shield, secure it and at last, reattach the negative battery cable.

OEM 2005 Jeep Liberty Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Heater Switch found

View related parts
2005 Jeep Liberty Switch Part Number: 5GW44DX9AC
$34.85 MSRP: $40.00
You Save: $5.15 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Power Seat Switch; Switch Heated Seat
- Replaces: 5GW44DX9AB
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GW44DX9AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2005 Jeep Liberty Seat Heater Switch Parts and Q&A

Q: How to Maintain the Seat Heater Switch for the Passenger Seat on 2005 Jeep Liberty?
A: Before beginning any service, remove the negative battery cable from the car. Either from under the seat or from under the car, take off the shield that covers the heated seat control and pull the wiring connector off the heated seat switch by depressing the lock. Gently rock the switch from the bottom to pull it out of its place. First, gently move the seat switch back and forth to get it into position and then link the hot seat switch electrical connector. Put in place the seat cushion side shield, secure it and at last, reattach the negative battery cable.