How to Maintain a Rear Wheel Speed Sensor on 2005 Jeep Liberty?

The sensor should be serviced by raising the car on a hoist and then disconnecting the sensor's wire harness. After that, take out the mounting stud (2) from the sensor (3) and remove the sensor (3). The seal should be securely attached between the sensor and wiring connector after you join the harness to sensor (3). If the O-ring has been removed, put it on the sensor. After inserting sensor (3) into housing (1), add sensor stud (2) and tighten it to 9 Nm (80 inch lbs.). After everything else, link the sensor electrical connector and then lower the vehicle.

OEM 2005 Jeep Liberty Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2005 Jeep Liberty Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2005 Jeep Liberty ABS Sensor, Rear Part Number: 56041393AA
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear; Anti-Lock Braking System Speed Sensor; Rear Speed Sensor; Sensor Wheel Speed; ABS Wheel Speed Sensor
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.6 x 2.1 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041393AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2005 Jeep Liberty Speed Sensor Parts and Q&A

Q: How to Maintain a Rear Wheel Speed Sensor on 2005 Jeep Liberty?
A: The sensor should be serviced by raising the car on a hoist and then disconnecting the sensor's wire harness. After that, take out the mounting stud (2) from the sensor (3) and remove the sensor (3). The seal should be securely attached between the sensor and wiring connector after you join the harness to sensor (3). If the O-ring has been removed, put it on the sensor. After inserting sensor (3) into housing (1), add sensor stud (2) and tighten it to 9 Nm (80 inch lbs.). After everything else, link the sensor electrical connector and then lower the vehicle.