How to service a Brake Fluid Level Sensor on 2006 Chrysler Pacifica?

First, take out the brake fluid reservoir level switch's wiring harness connector before servicing the brake fluid level sensor/switch. After that, press down the retaining tabs with your fingers on the brake fluid level switch at the opposite end. Pull out the brake fluid level switch from the master cylinder brake reservoir after you have pressed in the retaining tabs. For fixing, put the brake fluid level switch in the left side of the brake fluid vessel and hold it until the retaining pins click into place. Finally, hook the vehicle wiring harness connector to the brake fluid level switch.

OEM 2006 Chrysler Pacifica Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2006 Chrysler Pacifica Level Indicator Part Number: 5140310AA
$22.68 MSRP: $28.90
You Save: $6.22 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Brake Fluid Level; Fluid Level Switch; Switch; Switch Brake Fluid Level
- Replaces: 4797655
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 1.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5140310AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Pacifica Brake Fluid Level Sensor Parts and Q&A

Q: How to service a Brake Fluid Level Sensor on 2006 Chrysler Pacifica?
A: First, take out the brake fluid reservoir level switch's wiring harness connector before servicing the brake fluid level sensor/switch. After that, press down the retaining tabs with your fingers on the brake fluid level switch at the opposite end. Pull out the brake fluid level switch from the master cylinder brake reservoir after you have pressed in the retaining tabs. For fixing, put the brake fluid level switch in the left side of the brake fluid vessel and hold it until the retaining pins click into place. Finally, hook the vehicle wiring harness connector to the brake fluid level switch.