How to Service and Repair a Transmission Speed Sensor for Input on 2006 Chrysler Pacifica?

Tor the service and repair of the input speed sensor, disconnect the negative battery cable first. After that, take out the connector from the input speed sensor. Remove and unscrew the input speed sensor. If the O-ring on the speed sensor is damaged, you should replace it. First place the O-ring where it ought to be, then put the input speed sensor in and tighten it to a torque of 27 Nm (20 ft. lbs.). Remember to plug in the speed sensor wire and connect the battery negative terminal again.

OEM 2006 Chrysler Pacifica Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2006 Chrysler Pacifica ABS Sensor, Rear Passenger Side Part Number: 5166545AB
$52.60 MSRP: $102.00
You Save: $49.40 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Wheel Speed Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: 5103087AA, 5166545AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.3 x 3.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5166545AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2006 Chrysler Pacifica ABS Sensor, Front Driver Side Part Number: 5166544AC
$4.40 MSRP: $5.70
You Save: $1.30 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 5166544AA, 5166544AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.5 x 9.4 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5166544AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Pacifica Speed Sensor Parts and Q&A

Q: How to Service and Repair a Transmission Speed Sensor for Input on 2006 Chrysler Pacifica?
A: Tor the service and repair of the input speed sensor, disconnect the negative battery cable first. After that, take out the connector from the input speed sensor. Remove and unscrew the input speed sensor. If the O-ring on the speed sensor is damaged, you should replace it. First place the O-ring where it ought to be, then put the input speed sensor in and tighten it to a torque of 27 Nm (20 ft. lbs.). Remember to plug in the speed sensor wire and connect the battery negative terminal again.