How to Maintain an Ambient Temperature Sensor on 2006 Dodge Durango?

You should start by removing and disconnecting the negative battery cable before servicing the ambient air temperature sensor. Then take out the push pin 3 holding the ambient air temperature sensor 1 at the rear of the front bumper beam. Remove the wire harness connector 2 from the sensor and then remove the sensor from your vehicle. Start by joining connector 2 and sensor 1 together, place sensor 1 at the front as shown in the diagram and finish by securing it with push pin 3. At the last step, link the negative cable back to the battery.

OEM 2006 Dodge Durango Ambient Temperature Sensor

Inside Outside Auto Thermometer Gauge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ambient Temperature Sensor found

View related parts
2006 Dodge Durango Temperature Sensor, Front Part Number: 68518243AA
$47.14 MSRP: $69.85
You Save: $22.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Ambient Temperature; Air Temp, Front; Battery Temp; Coolant Temp.; Ambient Temperature Sensor; Air Temperature Sensor; Temperature Sending Unit; Sentinel Sensor
- Position: Front
- Replaces: 5149025AA, 5149265AB, 56042395
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 2.0 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68518243AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Base, Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SE, SLT, SLT Plus, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, ST, SXT, SXT Plus, Special Service, Sport | 3.7L V6, 3.9L V6, 4.7L V8, 5.2L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2006 Dodge Durango Ambient Temperature Sensor Parts and Q&A

Q: How to Maintain an Ambient Temperature Sensor on 2006 Dodge Durango?
A: You should start by removing and disconnecting the negative battery cable before servicing the ambient air temperature sensor. Then take out the push pin 3 holding the ambient air temperature sensor 1 at the rear of the front bumper beam. Remove the wire harness connector 2 from the sensor and then remove the sensor from your vehicle. Start by joining connector 2 and sensor 1 together, place sensor 1 at the front as shown in the diagram and finish by securing it with push pin 3. At the last step, link the negative cable back to the battery.