How to Service and Repair a Blower Motor Resistor on 2006 Jeep Commander?

First, get rid of the rear HVAC block and bring it to a working station. After that, remove the lock from the connector and unplug the rear HVAC wire harness from the back of the blower motor resistor. Unscrew the two screws holding the rear blower motor resistor to the rear HVAC section and pull out the resistor. To install the blower motor resistor, fit it between the rear HVAC housing liner and the outside body shell, then fasten the rear blower board connector and tighten it to 2 N.m (17 in. lbs.). Slide the relay harness into the rear HVAC wiring harness and remove the wiring harness from the compartment.

OEM 2006 Jeep Commander Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2006 Jeep Commander Resistor, Front Part Number: 5143127AA
$64.04 MSRP: $83.95
You Save: $19.91 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143127AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Resistor, Rear Part Number: 5183153AA
$17.09 MSRP: $36.80
You Save: $19.71 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor Blower Motor; Blower Motor Resistor
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 3.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183153AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885482AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Blower Motor Resistor Parts and Q&A

Q: How to Service and Repair a Blower Motor Resistor on 2006 Jeep Commander?
A: First, get rid of the rear HVAC block and bring it to a working station. After that, remove the lock from the connector and unplug the rear HVAC wire harness from the back of the blower motor resistor. Unscrew the two screws holding the rear blower motor resistor to the rear HVAC section and pull out the resistor. To install the blower motor resistor, fit it between the rear HVAC housing liner and the outside body shell, then fasten the rear blower board connector and tighten it to 2 N.m (17 in. lbs.). Slide the relay harness into the rear HVAC wiring harness and remove the wiring harness from the compartment.