Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Jeep Liberty Tie Rod End

Steering Rod End
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

  • 2006 Jeep Liberty Tie Rod End - 52125484AA
    2006 Jeep Liberty Tie Rod End Diagram - 52125484AA
    View related parts

    2006 Jeep Liberty Outer Tie Rod Part Number: 52125484AA

    $71.19 MSRP: $108.00
    You Save: $36.81 (35%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Tie Rod - Outer; Drag Link Repair Kit; Outer Tie Rod End
    • Position: Outer
    • Replaces: 5189419AA
    • Item Weight: 2.40 Pounds
    • Item Dimensions: 9.8 x 7.7 x 2.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52125484AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Liberty Submodels:
    • 65th Anniversary Edition, Limited, Renegade, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
  • 2006 Jeep Liberty Tie Rod End - 52125483AA
    2006 Jeep Liberty Tie Rod End Diagram - 52125483AA
    View related parts

    2006 Jeep Liberty Outer Tie Rod Part Number: 52125483AA

    $68.68 MSRP: $103.00
    You Save: $34.32 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Tie Rod - Outer; Drag Link Repair Kit; Outer Tie Rod End
    • Position: Outer
    • Replaces: 68003671AA
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 5.8 x 4.4 x 1.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52125483AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Liberty Submodels:
    • 65th Anniversary Edition, Limited, Renegade, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2006 Jeep Liberty Tie Rod End Parts and Q&A

  • Q: How to Inspect and Replace Tie Rod End Seals During Oil Changes on 2006 Jeep Liberty?
    A: As part of every oil change, inspect all seals on the tie rod and ball stud and if one is broken, you need to install a new tie rod. Having any steering component swapped, repaired or maintained always requires re-alignment to follow the vehicle's specifications. You should raise and prop up the vehicle, take off the tire and wheel assembly and mark the tie rod end jam nuts on the steering gear to make installation easier later. Loose the jam nut on the tie rod end, untwist the outer nut and pull the outer tie rod end from the knuckle by turning it around tool C3894A. After that, take out the outer tie rod end from the inner one. First, use the exact number of turns you found during removal to link the outer tie rod end to the inner end, then install the outer tie rod on the knuckle and tighten the nut to 108 Nm (80 ft. lbs.). With the wheel and jam nut assembly, tighten the nut to 75 Nm (55 ft. lbs.), reinstall the whole unit and center the steering wheel.

Related 2006 Jeep Liberty Parts

Alternate Year Models

+
2005 Jeep Liberty Tie Rod End 2007 Jeep Liberty Tie Rod End