How to Safely Service a Blower Motor Resistor on 2007 Chrysler PT Cruiser?

To work on the blower motor resistor, wait for five minutes until it has cooled, since it can get very warm during regular use. First, remove the negative battery cable and afterward remove the passenger side cowl grille screen. Gently pull the blower motor resistor out of the dash panel to unhook the tabs and finally move the connector lock to take off the wire harness from the resistor. Do not try to run the blower motor without the resistor attached or damage to the vehicle could occur.

OEM 2007 Chrysler PT Cruiser Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2007 Chrysler PT Cruiser Resistor Part Number: 5058026AB
$25.12 MSRP: $32.05
You Save: $6.93 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; Blower Motor Resistor; Resistor Blower Motor
- Replaces: 5058026AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.1 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5058026AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2007 Chrysler PT Cruiser Blower Motor Resistor Parts and Q&A

Q: How to Safely Service a Blower Motor Resistor on 2007 Chrysler PT Cruiser?
A: To work on the blower motor resistor, wait for five minutes until it has cooled, since it can get very warm during regular use. First, remove the negative battery cable and afterward remove the passenger side cowl grille screen. Gently pull the blower motor resistor out of the dash panel to unhook the tabs and finally move the connector lock to take off the wire harness from the resistor. Do not try to run the blower motor without the resistor attached or damage to the vehicle could occur.