How to Install a Blend Door Actuator on 2007 Jeep Wrangler?

To install the recirculation door actuator, place the actuator on the HVAC air inlet housing, connect the wire harness and secure the wire harness make sure it is aligned with the pivot shaft. Then, install the speaker, glove box and re-connect the negative battery cable.

OEM 2007 Jeep Wrangler Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2007 Jeep Wrangler Actuator Part Number: 68000470AA
$73.37 MSRP: $110.00
You Save: $36.63 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Actuator A/C And Heater Includes: Mounting Screws; Actuator A/C And Heater Includes: Screws; Actuator A/C And Heater
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68000470AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 6 Cyl 3.8 L GAS

2007 Jeep Wrangler Blend Door Actuator Parts and Q&A

Q: How to Install a Blend Door Actuator on 2007 Jeep Wrangler?
A: To install the recirculation door actuator, place the actuator on the HVAC air inlet housing, connect the wire harness and secure the wire harness make sure it is aligned with the pivot shaft. Then, install the speaker, glove box and re-connect the negative battery cable.