How to Install a Blower Motor in an HVAC System on 2008 Dodge Nitro?

After mounting the blower motor, put it into the bottom part of the HVAC unit. Use three screws to attach the blower motor to the HVAC housing and tighten each screw no more than 1.2 Nm (10 in. lbs.). Connect the blower motor to the wire harness connector of the instrument panel. If the vehicle comes with a silencer, put it below the passenger side of the instrument panel. Reattach the other negative cable as the last step.

OEM 2008 Dodge Nitro Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2008 Dodge Nitro Blower Motor Part Number: 68003996AA
$163.15 MSRP: $244.00
You Save: $80.85 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; Blower Assembly; Motor Blower With Wheel; HVAC Blower Motor
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.5 x 10.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003996AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Blower Motor Parts and Q&A

Q: How to Install a Blower Motor in an HVAC System on 2008 Dodge Nitro?
A: After mounting the blower motor, put it into the bottom part of the HVAC unit. Use three screws to attach the blower motor to the HVAC housing and tighten each screw no more than 1.2 Nm (10 in. lbs.). Connect the blower motor to the wire harness connector of the instrument panel. If the vehicle comes with a silencer, put it below the passenger side of the instrument panel. Reattach the other negative cable as the last step.