How is the Blower Motor Installed in the HVAC Housing on 2007 Dodge Nitro?

Set the blower motor into the lower part of the HVAC shell. Place the blower motor into the HVAC housing and fasten it with all three screws, threaded tight enough to reach 1.2 Nm (10 in. lbs.). Attach the blower motor wire harness connector to the instrument panel. Should it apply, fit the silencer under the passenger side of the instrument panel. After that, connect the negative battery cable again.

OEM 2007 Dodge Nitro Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2007 Dodge Nitro Blower Motor Part Number: 68003996AA
$163.15 MSRP: $244.00
You Save: $80.85 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; Blower Assembly; Motor Blower With Wheel; HVAC Blower Motor
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.5 x 10.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003996AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Blower Motor Parts and Q&A

Q: How is the Blower Motor Installed in the HVAC Housing on 2007 Dodge Nitro?
A: Set the blower motor into the lower part of the HVAC shell. Place the blower motor into the HVAC housing and fasten it with all three screws, threaded tight enough to reach 1.2 Nm (10 in. lbs.). Attach the blower motor wire harness connector to the instrument panel. Should it apply, fit the silencer under the passenger side of the instrument panel. After that, connect the negative battery cable again.