How to Maintain a Blower Motor Resistor on 2008 Dodge Nitro?

Disable the air bag system by detaching the negative battery cable, then give the air bag system capacitor two minutes to deplete. Let the blower motor off for at least five minutes to give the resistor a chance to cool, since it can warm up a lot when operating. Before anything else, pull the door down on the glove box and then take out the connector from the blower motor resistor. With that done, remove the two screws holding the blower motor resistor and get rid of the resistor.

OEM 2008 Dodge Nitro Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2008 Dodge Nitro Resistor Part Number: 68003998AA
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885482AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Blower Motor Resistor Parts and Q&A

Q: How to Maintain a Blower Motor Resistor on 2008 Dodge Nitro?
A: Disable the air bag system by detaching the negative battery cable, then give the air bag system capacitor two minutes to deplete. Let the blower motor off for at least five minutes to give the resistor a chance to cool, since it can warm up a lot when operating. Before anything else, pull the door down on the glove box and then take out the connector from the blower motor resistor. With that done, remove the two screws holding the blower motor resistor and get rid of the resistor.