JeepParts
My Garage
My Account
Cart
OEM 2008 Dodge Viper A/C Hose
Air Conditioning Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 A/C Hoses found
2008 Dodge Viper Suction Hose Part Number: 5264928AA
$37.12 MSRP: $44.00You Save: $6.88 (16%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.8 x 5.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5264928AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Viper Suction Hose Part Number: 68545796AA
Product Specifications- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Hose
- Replaces: 5264988AG, 5264988AE, 5264988AF, 5264988AD
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68545796AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Viper Liquid Line Part Number: 5264926AE
Product Specifications- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Hose; Line A/C Liquid
- Replaces: 5264926AD
- Item Weight: 1.30 Pounds
- Item Dimensions: 33.9 x 13.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5264926AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Viper Discharge Hose Part Number: 5264927AC
Product Specifications- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Line A/C Discharge
- Item Weight: 1.10 Pounds
- Item Dimensions: 11.7 x 9.3 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5264927AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Viper A/C Hose Parts and Q&A
- Q: How Can Proper Maintenance of the A/C Hose Prevent System Malfunction and Compressor Damage on 2008 Dodge Viper?A: When you service the A/C refrigerant system, check and adjust the oil level to avoid any A/C system problems and possible compressor harm. Should several A/C components be replaced at once, use the Refrigerant Oil Capacities chart to see how much oil must be added. Make sure to change the seals on the refrigerant line if you disconnect it, to avoid any leaks. Before anything else, put the A/C liquid line into the engine and remove all tape and plugs on the fittings and ports on the condenser and evaporator. Seal the rubber O-rings onto the fitting ends of the A/C liquid line, but do so only with R-134a-recommended O-rings and suitable oil. Fasten the A/C liquid line to the evaporator and tighten its securing nut to 13.5 Nm (10 ft. lbs.). After that, connect the A/C liquid line to the condenser and attach the bolt, closing to 18 Nm (13 ft. lbs.). Install the A/C liquid line bolt into the right inner front fender before you secure the line. Fit the air ducts back to the air cleaner front and link up the negative battery terminal. Remove refrigerant from the system, put in oil as needed and then charge it if necessary.
Related 2008 Dodge Viper Parts
2008 Dodge Viper A/C Accumulator
2008 Dodge Viper A/C Clutch
2008 Dodge Viper A/C Compressor
2008 Dodge Viper A/C Compressor Cut-Out Switches
2008 Dodge Viper A/C Condenser
2008 Dodge Viper A/C System Valve Core
2008 Dodge Viper Blend Door Actuator
2008 Dodge Viper Blower Motor
2008 Dodge Viper Blower Motor Resistor
2008 Dodge Viper Evaporator
2008 Dodge Viper HVAC Pressure Switch
2008 Dodge Viper Heater Core