How to Maintain a Blower Motor Resistor on 2008 Jeep Commander?

First, turn off the air bag system by disconnecting and separating the car's negative battery cable; do this for two minutes to ensure the capacitor drains. Before proceeding, wait five minutes after turning off the blower motor as the resistor can become quite hot when the motor runs. Do not try to run the blower motor without its resistor, since this can damage your vehicle. Take out the negative battery cable as the first step. Remove the glove box from the instrument panel after that. Release the door near the wire harness connector and remove it from the blower motor resistor. Loosen the two screws that hold the blower motor resistor in place and take out the resistor from the HVAC housing.

OEM 2008 Jeep Commander Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Motor Resistors found

View related parts
2008 Jeep Commander Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68317103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Resistor, Front Part Number: 5143127AA
$64.04 MSRP: $83.95
You Save: $19.91 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143127AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Resistor, Rear Part Number: 5183153AA
$17.09 MSRP: $36.80
You Save: $19.71 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor Blower Motor; Blower Motor Resistor
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 3.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183153AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Resistor, Front Part Number: 68020227AA
$47.46 MSRP: $67.10
You Save: $19.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; Resistor Blower Motor; Blower Motor Resistor
- Position: Front
- Item Weight: 1.20 Pounds
- Item Dimensions: 4.1 x 3.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020227AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Blower Motor Resistor Parts and Q&A

Q: How to Maintain a Blower Motor Resistor on 2008 Jeep Commander?
A: First, turn off the air bag system by disconnecting and separating the car's negative battery cable; do this for two minutes to ensure the capacitor drains. Before proceeding, wait five minutes after turning off the blower motor as the resistor can become quite hot when the motor runs. Do not try to run the blower motor without its resistor, since this can damage your vehicle. Take out the negative battery cable as the first step. Remove the glove box from the instrument panel after that. Release the door near the wire harness connector and remove it from the blower motor resistor. Loosen the two screws that hold the blower motor resistor in place and take out the resistor from the HVAC housing.